Skip to main content
Renesas Electronics UPC4081G2-E1-A — Logic ICs
Renesas Electronics

UPC4081G2-E1-A General Purpose Op-Amp, 3 MHz, 13V/µs, 8-SOP

MPNUPC4081G2-E1-A
End of Life

NEC UPC4081G2--A, General Purpose Amplifier, 1 Circuit, 3 MHz Gain Bandwidth, 13V/µs Slew Rate, 10 V to 32 V Supply, 8-SOP (8-SOIC), Surface Mount, Bulk.

$0.68Ref. price · indicative, final on quote
UPC4081G2-E1-A datasheet
Packaging8-SOIC (0.173", 4.40mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

UPC4081G2-E1-A Technical Specifications
ParameterValue
Mounting typeSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset5 mV
Voltage - supply span32 V
Current - supply2mA
Current - input bias30 pA
Current - output (Channel)10 mA
Operating temperature-20°C ~ 80°C (TA)
Gain bandwidth product3 MHz
PackageBulk
Slew rate13V/µs
Case8-SOIC (0.173\", 4.40mm Width)
Number of circuits1

Product details

Single-supply general-purpose op-amp in an 8-SOP

The UPC4081G2-E1-A: General-purpose amplifier, 1 circuit, 3 MHz gain-bandwidth, 13V/µs slew rate, 8-SOP package. Supply span runs from 10 V to 32 V single or split supply. Quiescent current is 2 mA per amplifier. Input bias current is 30 pA typical, and input offset voltage is 5 mV maximum — adequate for non-precision DC-coupled stages.

Temperature grade and environment

Rated for -20°C to 80°C ambient, this is a commercial/light-industrial temperature grade.

Frequently asked questions

Can I replace UPC4081G2--A with an LM358?

An LM358 is a dual op-amp with a much lower gain-bandwidth (typically 1 MHz) and a slower slew rate (0.3 V/µs typical). The UPC4081G2--A is a single-channel part with 3 MHz GBW and 13V/µs slew rate, so it is not a direct pin-for-pin or performance substitute. For a single-channel replacement with similar speed, consider a part like the EL5220TIYZ (8 MHz, 12 V/µs) — but verify the pinout and supply range against your design.