600 V / 25 A Trench IGBT in an SMD power package
The Renesas RJH60M2DPE-00#J3 is a 600 V, 25 A Trench IGBT in an SC-83 (4-LDPAK) surface-mount package. It targets hard-switched power stages — motor drives, PFC boost converters, welding inverters, and induction heating — where the 2.5 V typical Vce(on) at 15 V gate, 12 A collector keeps conduction losses in check. Gate charge of 33 nC is modest for this current class, which relaxes gate-driver sourcing requirements and cuts switching losses. Switching energy measures 180 µJ on and off under the test condition of 300 V, 12 A, 5 Ω gate resistor, 15 V gate drive — balanced edges that simplify snubber design in hard-switched bridges.
Package and mounting — SC-83 / 4-LDPAK
The SC-83 case is a large-gauge SMD package, also referred to as 4-LDPAK. It has a wide exposed drain pad on the bottom for thermal transfer to the PCB. The mounting type is surface mount. A generous copper land pattern with multiple vias to an internal plane is expected for any continuous current above a few amps. The package is — not tape-and-reel — which means manual or low-volume placement. Verify pick-and-place compatibility if automated assembly is planned; Bulk tubes are common for this package class.
It remains a current-production part from Renesas.