Active production — no obsolescence risk
The PS9307AL2-V-AX: ROHS3 compliant and carries CSA, UL, and VDE approvals, so it ships into regulated markets without additional certification paperwork.
5000Vrms isolation with 50kV/µs transient immunity
Rated for 5000Vrms isolation — enough for reinforced insulation in mains-connected gate drive circuits, motor drives, and industrial power supplies. Common-mode transient immunity of 50kV/µs minimum keeps the output from glitching when the IGBT or SiC FET switches at high dv/dt — a real concern in fast-switching power stages. 600mA peak output current drives the gate charge of medium-power IGBTs and MOSFETs directly, without an external buffer in many cases.
150ns propagation delay, -40 to 125°C range
Propagation delay is 150ns max for both tPLH and tPHL, with pulse-width distortion capped at 50ns — tight enough for 20-100 kHz switching loops where dead-time matching matters. Rise and fall times are 6ns and 7ns typical, so the output edge is clean into a capacitive gate load without excessive ringing.
6-SOIC surface mount — board-fit detail
Packaged in a 6-SOIC with 0.268" (6.80mm) body width — the supplier device package is designated 6-SDIP, but the physical footprint is the standard 6-pin SOIC land pattern. Surface-mount assembly with strip packing — no reel, so it suits prototype runs and low-volume production where pick-and-place handles cut tape.