Skip to main content
Renesas Electronics PS9151-V-AX — Discrete Semiconductors

Renesas PS9151-V-AX Photocoupler, 15Mbps, 3750Vrms, 5-SOIC

MPNPS9151-V-AX
End of Life

Renesas Electronics PS9151-V-AX photocoupler, 15 Mbps data rate, 3750 Vrms isolation, Open Collector output, 5-SOIC package, Tape & Reel.

$7.05Ref. price · indicative, final on quote
Packaging6-SOIC (0.173", 4.40mm Width), 5 Leads
RoHSROHS3 Compliant
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

PS9151-V-AX specifications
ParameterValue
Input typeDC
Output typeOpen Collector
MountingSurface Mount
Voltage4.5V ~ 5.5V
Voltage - isolation3750Vrms
Voltage - forward (Vf)1.65V
Current - output (Channel)2 mA
Current - DC forward (If)20mA
Operating temperature-40°C ~ 100°C
PackageTape & Reel (TR)
Data rate15Mbps
Case6-SOIC (0.173\", 4.40mm Width), 5 Leads
Channels1
Inputs - side 1/Side 21/0
Rise (Fall time)4ns, 4ns
Propagation delay tpLH (tpHL)60ns, 60ns
Common mode transient immunity15kV/µs

Product details

15 Mbps isolated digital interface

The Renesas PS9151-V-AX is a single-channel photocoupler in a 5-lead SOIC package, delivering 15 Mbps data rate with an open-collector output. It provides 3750 Vrms isolation between input and output sides, with a typical forward voltage of 1.65 V at the LED input. Common-mode transient immunity is rated at 15 kV/µs minimum, which means it rejects fast voltage transients that would otherwise couple across the isolation barrier in motor-drive or inverter applications. The 60 ns max propagation delay (both tpLH and tpHL) keeps the signal timing predictable for synchronous interfaces like SPI or RS-485 isolation.

Industrial temperature and package fit

The 5-SO package (6-SOIC body, 0.173" width, 4.40 mm) uses a standard SOIC-5 footprint — the same land pattern as many 6-pin SOIC photocouplers, but with one fewer pin on one side. The open-collector output sinks 2 mA per channel, sufficient for driving a 5 V CMOS input or a low-speed optocoupler load. The 20 mA max LED forward current allows direct drive from a 5 V GPIO through a series resistor.

Frequently asked questions

What is the data rate and propagation delay of the PS9151-V-AX?

Rise and fall times are 4 ns typical.