Skip to main content
Renesas Electronics PS2565L2-1-V-A — Discrete Semiconductors

Renesas PS2565L2-1-V-A Optocoupler, 5000Vrms, 4-SMD

MPNPS2565L2-1-V-A
End of Life

Renesas Electronics PS2565L2-1-V-A single-channel transistor-output optocoupler, 5000Vrms isolation, 80-400% CTR range, 4-SMD gull-wing package, surface-mount, -55 to +100°C, RoHS3 compliant.

$1.51Ref. price · indicative, final on quote
Packaging4-SMD, Gull Wing
RoHSROHS3 Compliant
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

PS2565L2-1-V-A specifications
ParameterValue
Input typeAC, DC
Output typeTransistor
MountingSurface Mount
Voltage - isolation5000Vrms
Voltage - output80V
Voltage - forward (Vf)1.17V
Current - output (Channel)50mA
Current transfer ratio400% @ 5mA
Current - DC forward (If)80 mA
Operating temperature-55°C ~ 100°C
PackageTube
Case4-SMD, Gull Wing
Channels1
Vce saturation300mV
Rise (Fall time)3µs, 5µs

Product details

Isolation barrier and signal transfer

The PS2565L2-1-V-A is a single-channel optocoupler from Renesas with a transistor output, rated for 5000Vrms isolation between input and output. That isolation voltage qualifies it for safety barriers in industrial power supplies, motor drives, and PLC I/O modules where galvanic separation between control and power circuits is mandatory. The current transfer ratio spans 80% minimum to 400% maximum at 5mA forward current, giving you a wide operating window for the LED drive. At the low end, 80% CTR means 4mA collector current from 5mA input — enough to saturate a downstream logic input. At 400%, the same 5mA input drives 20mA output, useful when driving a low-impedance load or when the LED current is constrained by the upstream driver.

Input flexibility and output ratings

The input accepts both AC and DC drive — the internal back-to-back LED structure handles reverse polarity without an external diode. This simplifies the BOM when the optocoupler is driven from a bipolar signal or an AC line-sense circuit. Output side: the phototransistor blocks up to 80V collector-emitter and sinks 50mA continuous per channel. Saturation voltage is 300mV max at rated current, so the output drops less than a logic-low threshold when driving a 5V or 3.3V input. Rise and fall times are 3µs and 5µs typical — fast enough for 100kHz switching signals but not for high-speed data isolation above 1Mbps.

Package, temperature range, and compliance

Housed in a 4-SMD gull-wing package (supplier device package 4-SMD), the PS2565L2-1-V-A is a surface-mount part shipped in tube format. The gull-wing leads provide visual solder-joint inspection access and good thermal cycling reliability on standard FR4 boards. The forward voltage is 1.17V typical at rated current; maximum DC forward current is 80mA. RoHS3 compliant per Renesas lifecycle data — no exemption-based restrictions on the BOM.

Sourcing and lifecycle posture

No pin-compatible second-source is listed on the Renesas cross-reference, so the BOM position is single-sourced to this order code.

Frequently asked questions

What compliance documentation does Renesas provide for PS2565L2-1-V-A?

The part is RoHS3 compliant per Renesas lifecycle data. No UL, IEC, or REACH documentation is listed in the available records — confirm with the manufacturer for specific certification reports.