IDT, 16-bit registered transceiver, IDT74FCT16952BTPA, non-inverting, 3-state, 5V supply, 56-TVSOP, industrial temperature.
| Parameter | Value |
|---|---|
| Logic type | Transceiver, Non-Inverting |
| Output type | 3-State |
| Mounting | Surface Mount |
| Supply voltage | 4.5V ~ 5.5V |
| Current - output high, low | 32mA, 64mA |
| Operating temperature | -40°C ~ 85°C (TA) |
| Package | Bulk |
| Case | 56-TFSOP (0.173\", 4.40mm Width) |
| Number of elements | 2 |
| Number of bits per element | 8 |
Each output can sink 32mA and source 64mA, which provides enough drive for heavily loaded backplanes or memory arrays without external buffers. The 3-state outputs allow multiple transceivers to share a common data bus under control of the output enable signals.
Designs that require RoHS conformance will need a lead-free alternative or an exemption waiver.
No, this part is listed as RoHS non-compliant. It contains lead or other restricted substances and is not suitable for RoHS-required assemblies without an exemption.
It is a 16-bit registered transceiver with non-inverting data paths and 3-state outputs, organized as two 8-bit elements. It is used for bidirectional data flow on 5V buses, typically in backplane or memory interface applications.