Skip to main content
Renesas Electronics DA7212-01UM2 — Crystals & Oscillators

DA7212-01UM2 Audio Codec – Renesas, WLCSP, Active

MPNDA7212-01UM2
End of Life

Renesas DA7212-01UM2 Audio Codec, 34-CSP (4.5x1.66), Sigma Delta, 2 ADC / 2 DAC, 90 / 100 dB SNR, -40°C to 85°C, surface mount

$2.51Ref. price · indicative, final on quote
Packaging34-UFBGA, WLCSP
RoHSRoHS Compliant
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DA7212-01UM2 specifications
ParameterValue
TypeAudio
MountingSurface Mount
Voltage - supply, analog1.7V ~ 2.5V
Voltage - supply, digital1.6 V ~ 3.6V
Operating temperature-40°C ~ 85°C
PackageTape & Reel (TR); Cut Tape (CT)
Sigma deltaYes
Case34-UFBGA, WLCSP
Number of ADCs (DACs)2 / 2
S (N ratio, ADCs, DACs (db) typ)90 / 100

Product details

Audio codec for portable and embedded audio

The DA7212-01UM2 is a low-power audio codec from Renesas, built around a Sigma-Delta architecture with 2 ADCs and 2 DACs. It delivers a typical SNR of 90 dB on the ADC path and 100 dB on the DAC path — numbers that put it in the range for consumer headset, voice, and portable speaker designs where dynamic range matters.

The analog supply runs from 1.7 V to 2.5 V; the digital supply is a separate 1.6 V to 3.6 V rail.

WLCSP package — layout notes

The part comes in a 34-UFBGA, WLCSP (wafer-level chip-scale package) with a supplier device package of 34-CSP measuring 4.5x1.66 mm. The 0.50 mm ball pitch typical of this package class demands a controlled-impedance PCB stack-up and careful decoupling placement — a 4-layer board is the practical minimum for fan-out.

Frequently asked questions

What package does the DA7212-01UM2 use?

It is supplied in a 34-UFBGA, WLCSP (wafer-level chip-scale package), with a supplier device package size of 34-CSP (4.5x1.66 mm).

Does the DA7212-01UM2 work with 3.3V logic?

Yes. The digital supply voltage range is 1.6 V to 3.6 V, so a 3.3 V digital rail is within the specified operating range.