Skip to main content
Log in
STMicroelectronics M95128-DRDW3TP/K — DC-DC Power Modules

M95128-DRDW3TP/K 128Kbit SPI EEPROM, AEC-Q100, 20 MHz

MPNM95128-DRDW3TP/K
End of Life

STMicroelectronics Automotive AEC-Q100 M95128-DRDW3TP/K, 128Kbit SPI EEPROM, 20 MHz clock, 1.8V-5.5V supply, -40°C to 125°C, 8-TSSOP package.

$1.54Ref. price · indicative, final on quote
STMicroelectronics M95128-DRDW3TP/K datasheet (PDF)
Packaging8-TSSOP (0.173", 4.40mm Width)
RoHSROHS3 Compliant
SeriesAutomotive, AEC-Q100
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

M95128-DRDW3TP/K specifications
ParameterValue
SeriesAutomotive, AEC-Q100
Memory typeNon-Volatile
MountingSurface Mount
Voltage1.8V ~ 5.5V
Frequency20 MHz
Memory interfaceSPI
Operating temperature-40°C ~ 125°C (TA)
PackageTape & Reel (TR); Cut Tape (CT)
TechnologyEEPROM
Memory size128Kbit
Memory formatEEPROM
Case8-TSSOP (0.173\", 4.40mm Width)
Memory organization16K x 8
Write cycle time - word, page4ms

Product details

The STMicroelectronics M95128-DRDW3TP/K is a 128 Kbit serial EEPROM with an SPI interface, organized as 16K x 8 bits.

20 MHz SPI clock and 4 ms write cycle

The 20 MHz SPI clock rate supports fast read and write operations for parameter updates during ECU boot or sensor calibration routines. The write cycle time of 4 ms per word or page sets the latency for non-volatile storage — useful for applications that log fault codes or trim values at key-off.

Housed in an 8-TSSOP (4.40 mm width) package with surface-mount termination. The 8-pin footprint is common across the M95xxx series, so a board layout for a smaller-density part can accept this 128 Kbit device without a PCB spin.

It is ROHS3 compliant.

Frequently asked questions

What is the equivalent or replacement for M95128-DRDW3TP/K?

Within the same family, the M95080 series (8 Kbit) shares the same SPI interface and 20 MHz clock but offers only 8 Kbit density. For a drop-in replacement at 128 Kbit, look for other AEC-Q100 qualified 128 Kbit SPI EEPROMs in 8-TSSOP; verify the write cycle time and temperature grade match your BOM.

Is M95128-DRDW3TP/K RoHS compliant?

Yes, it is ROHS3 compliant.

Can M95128-DRDW3TP/K be used as a drop-in replacement for other 128 Kbit SPI EEPROMs?

It depends on the pinout and supply voltage of the existing part. The 8-TSSOP footprint and 1.8 V to 5.5 V supply range cover many common 128 Kbit SPI EEPROMs, but always confirm the operating temperature grade and write cycle time match your application.