Skip to main content
STMicroelectronics M95080-RMB6TG — Memory (DRAM / SRAM / Flash / EEPROM)

STMicroelectronics M95080-RMB6TG 8Kbit SPI EEPROM, Obsolete

MPNM95080-RMB6TG
Obsolete

STMicroelectronics M95080-RMB6TG, 8Kbit SPI EEPROM, 1K×8 organization, 10 MHz clock, 1.8–5.5 V supply, 8-UFDFPN (2×3 mm) exposed-pad package, −40 to 85 °C operating range.

Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

M95080-RMB6TG specifications
ParameterValue
Memory typeNon-Volatile
MountingSurface Mount
Voltage1.8V ~ 5.5V
Frequency10 MHz
Memory interfaceSPI
Operating temperature-40°C~85°C(TA)
PackageTape & Reel (TR); Cut Tape (CT)
TechnologyEEPROM
Memory size8Kbit
Memory formatEEPROM
Case8-UFDFN Exposed Pad
Memory organization1K x 8
Write cycle time - word, page5ms

Product details

The M95080-RMB6TG is an 8-Kbit serial EEPROM from STMicroelectronics, organized as 1K × 8 bits and accessed over an SPI bus running at up to 10 MHz.

Obsolete status — what it means for supply and the replacement path

STMicroelectronics lists the M95080-RMB6TG as Obsolete, though the spec table carries a 'current' lifecycle flag — the official manufacturer status overrides the catalog record.

Write-cycle timing and the 5 ms page-program window

For a data-logging application writing one 8-bit word every 10 seconds, the EEPROM spends 0.05 % of its time in the write cycle — the rest is read-idle. The 5 ms window also sets the minimum SPI bus idle time between write commands; a host that polls the status register for the WIP bit must wait at least this long before the next write cycle starts.

Package and board-fit: 8-UFDFPN exposed pad

The exposed pad on the underside requires a thermal land on the PCB — the datasheet's recommended land pattern keeps the junction temperature within the −40 to 85 °C operating range at the 10 MHz clock rate.

Frequently asked questions

Where can I buy M95080-RMB6TG and what is the lead time?

This part is sourced to order through independent distribution. Availability and current pricing are confirmed at quote time against an RFQ — no stock count or lead-time figure is published on this listing.

How do I authenticate a M95080-RMB6TG sourced from an independent distributor?

Start with the laser-etched date code: check the font, depth, and alignment against the expected STMicroelectronics plant format for that week. The exposed-pad UFDFPN package allows visual die inspection without decapsulation. Any mismatch between the etched date code and the distributor's certificate of conformance or lot documentation is a forensic stop-signal, not a discrepancy to overlook.