Skip to main content
STMicroelectronics M95080-MN6T — Memory (DRAM / SRAM / Flash / EEPROM)

STMicroelectronics M95080-MN6T 8Kbit SPI EEPROM, 10 MHz

MPNM95080-MN6T
Obsolete

STMicroelectronics M95080-MN6T, 8Kbit SPI EEPROM, 1K x 8 organization, 10 MHz clock, 4.5–5.5 V supply, -40°C to 85°C, 8-SOIC (Tape & Reel).

Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

M95080-MN6T specifications
ParameterValue
Memory typeNon-Volatile
MountingSurface Mount
Voltage4.5V ~ 5.5V
Frequency10 MHz
Memory interfaceSPI
Operating temperature-40°C~85°C(TA)
PackageTape & Reel (TR)
TechnologyEEPROM
Memory size8Kbit
Memory formatEEPROM
Case8-SOIC (0.154\", 3.90mm Width)
Memory organization1K x 8
Write cycle time - word, page5ms

Product details

8Kbit SPI EEPROM in 8-SOIC — 5V operation, 10 MHz bus

The M95080-MN6T is an 8Kbit serial EEPROM from STMicroelectronics, organized as 1K x 8 bits and accessed via an SPI bus running up to 10 MHz.

The 8Kbit SPI EEPROM market includes many functional equivalents, but a pin-compatible drop-in from another vendor would require verifying the SPI command set and write-cycle timing against the original design.

Write-cycle timing and firmware update planning

The write cycle time per word or page is 5 ms (typical). For a 1K x 8 memory, a full-chip write (sequentially writing all 1024 bytes) would take roughly 5.1 seconds at one byte per write cycle, assuming no page write mode acceleration. This sets a floor for firmware update or parameter storage intervals — a field update that rewrites the entire array must budget for several seconds of uninterrupted write time.

Frequently asked questions

What is the M95080-MN6T's memory size and interface?

8 Kbit, organized as 1K x 8, with an SPI serial interface supporting clock frequencies up to 10 MHz.

What package does the M95080-MN6T come in?

Supplier device package is 8-SOIC. Delivered in Tape & Reel.