STMicroelectronics M24C04-MN6T: I²C serial EEPROM, 4Kbit (512×8), 400 kHz, 4.5V–5.5V supply, 8-SOIC (3.90 mm), -40°C to 85°C, 5ms write cycle, SOIC-8 tape-and-reel.
$0.9000Ref. price · indicative, final on quote
StockContact for availability
MOQ1 pcs
- 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
- Date & lot codes on quoteStated per line before you commit; label photos on request.
- MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
- PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
Specifications
| Parameter | Value |
|---|---|
| Memory type | Non-Volatile |
| Mounting type | Surface Mount |
| Voltage | 4.5V ~ 5.5V |
| Frequency | 400 kHz |
| Memory interface | I²C |
| Operating temperature | -40°C ~ 85°C (TA) |
| Package | Tape & Reel (TR) Cut Tape (CT) |
| Technology | EEPROM |
| Access time | 900 ns |
| Memory size | 4Kbit |
| Memory format | EEPROM |
| Case | 8-SOIC (0.154\", 3.90mm Width) |
| Memory organization | 512 x 8 |
| Write cycle time - word, page | 5ms |
Frequently asked questions
Does the M24C04-MN6T use the same I²C address scheme as the Microchip 24LC04B or AT24C04?
Yes — the three address pins (A0/A1/A2) follow the industry-standard hardwired scheme shared by the AT24C04 and 24LC04 families, supporting up to eight devices on a single I²C segment without address conflict.
What supply voltage and I²C clock speed does this part require?
4.5 V to 5.5 V single supply with a 400 kHz maximum I²C clock rate. The 5 ms write-cycle time applies at nominal VCC; operating below 5 V nominal may extend write time — check the STMicroelectronics datasheet for the VCC-versus-write-cycle curve if your rail runs close to the 4.5 V floor.