Skip to main content
STMicroelectronics M24C01-WMN6T — Memory (DRAM / SRAM / Flash / EEPROM)

STMicroelectronics M24C01-WMN6T 1Kbit I²C EEPROM, 900 ns

MPNM24C01-WMN6T
Obsolete

STMicroelectronics M24C01-WMN6T, 1Kbit I²C EEPROM, 400 kHz clock, 2.5–5.5 V supply, 8-SOIC, -40°C to 85°C, 128×8 organization, 5 ms write cycle.

StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

M24C01-WMN6T Technical Specifications
ParameterValue
Memory typeNon-Volatile
Mounting typeSurface Mount
Voltage2.5V ~ 5.5V
Frequency400 kHz
Memory interfaceI²C
Operating temperature-40°C~85°C(TA)
PackageTape & Reel (TR); Cut Tape (CT)
TechnologyEEPROM
Access time900 ns
Memory size1Kbit
Memory formatEEPROM
Case8-SOIC (0.154\", 3.90mm Width)
Memory organization128 x 8
Write cycle time - word, page5ms

Product details

What this 1Kbit I²C EEPROM does

The STMicroelectronics M24C01-WMN6T is a 1Kbit serial EEPROM with an I²C interface, organized as 128 x 8 bits. It runs on a 2.5 V to 5.5 V supply and clocks up to 400 kHz. The 900 ns access time is typical for this density and bus speed — enough for configuration and calibration data storage in embedded systems. The -40°C to 85°C operating range covers industrial environments like motor drives, outdoor telecom cabinets, and factory automation panels.

Obsolete — sourcing reality

The M24C01-WMN6T is marked obsolete by STMicroelectronics. No official successor is listed in the available records. For existing BOM lines, the part is available through independent distribution — sourced and quoted to order against an RFQ.

900 ns access time — what it means on the bus

At 400 kHz I²C, the 900 ns access time is the time from the slave address match to the first data bit being available. The 5 ms write cycle is the bigger constraint.

Package and footprint

The part comes in an 8-SOIC package (0.154-inch body width, 3.90 mm). It is a standard footprint — a board layout for a larger-density EEPROM in the same family will accept this part without a respin.

Frequently asked questions

What is the replacement for M24C01-WMN6T?

No official direct replacement is listed. The M24C02-WMN6T (2Kbit, same 8-SOIC footprint and I²C interface) is a common drop-in for designs needing more storage, but verify the address map and software compatibility.

What are the specifications of M24C01-WMN6T?

1Kbit I²C EEPROM, 128 x 8 organization, 400 kHz clock, 900 ns access time, 2.5 V to 5.5 V supply, 5 ms write cycle, -40°C to 85°C operating temperature, 8-SOIC package.

What is the operating voltage of M24C01-WMN6T?

The supply voltage range is 2.5 V to 5.5 V.

M24C01-WMN6T vs M24C02-WMN6T difference?

The M24C02-WMN6T doubles the density to 2Kbit (256 x 8) in the same 8-SOIC package and I²C interface. The pinout and bus timing are identical, so a board swap is straightforward if the firmware handles the larger address space.