Skip to main content
Log in
ROHM Semiconductor BD00GC0MEFJ-ME2 — Analog & Data Acquisition

BD00GC0MEFJ-ME2 ROHM Automotive LDO Regulator 1A Adjustable

MPNBD00GC0MEFJ-ME2
End of Life

ROHM Semiconductor BD00GC0MEFJ-ME2, Automotive AEC-Q100 series, adjustable positive LDO regulator, 1A output, 8-HTSOP-J package

$1.72Ref. price · indicative, final on quote
ROHM Semiconductor BD00GC0MEFJ-ME2 datasheet (PDF)
Packaging8-SOIC (0.154", 3.90mm Width) Exposed Pad
RoHSROHS3 Compliant
SeriesAutomotive, AEC-Q100
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

BD00GC0MEFJ-ME2 specifications
ParameterValue
SeriesAutomotive, AEC-Q100
Output typeAdjustable
MountingSurface Mount
Voltage - input14V
Voltage dropout1.2V @ 1A
Voltage - output13V
Voltage - output (Min (Fixed))1.5V
Output current1A
Current - supply1.2 mA
Current - quiescent0.6 mA
Operating temperature-40°C ~ 105°C
PackageTape & Reel (TR); Cut Tape (CT)
Case8-SOIC (0.154\", 3.90mm Width) Exposed Pad
Control featuresEnable
Protection featuresOver Current, Over Temperature, Soft Start
Number of regulators1
Output configurationPositive

Product details

Automotive-grade adjustable LDO for sensor and MCU rails

The BD00GC0MEFJ-ME2 is an adjustable positive LDO regulator from ROHM's Automotive AEC-Q100 series, delivering up to 1A continuous output. Input voltage range extends to 14V max, with an adjustable output from 1.5V up to 13V set by external resistors. The 8-HTSOP-J package with exposed pad helps pull heat into the PCB copper plane.

Protection and control for harsh environments

Built-in protection covers over-current, over-temperature, and soft-start — no external watchdog needed. An Enable pin allows the regulator to be gated by an ECU sleep signal. Quiescent current is 0.6 mA typical, rising to 1.2 mA max at full load. The dropout voltage is 1.2V max at 1A, so a 5V rail needs at least 6.2V input to stay in regulation.

Active production with AEC-Q100 traceability

Status is Active per ROHM's product lifecycle. The part is ROHS3 compliant.

Frequently asked questions

Is BD00GC0MEFJ-ME2 AEC-Q100 qualified?

Yes, it is listed under the Automotive AEC-Q100 series. Qualification covers the -40°C to 105°C operating range.

Does BD00GC0MEFJ-ME2 require any external components?

Output voltage is set by two external resistors between the adjust pin and ground. Input and output capacitors are recommended per the LDO topology; the Enable pin can be left floating or tied to Vin if not used.