Skip to main content
Log in
Panasonic Electric Works AQY210EHA — Signal Relays

AQY210EHA PhotoMOS Relay, SPST-NO, 130 mA, 350 V, SMD

MPNAQY210EHA
Active

Panasonic Electric Works PhotoMOS™ AQY series, SPST-NO (1 Form A) solid state relay, 130 mA load current, 350 V AC/DC, 25 Ohm on-state resistance, surface mount 4-SMD gull wing.

$1.9900Ref. price · indicative, final on quote
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

AQY210EHA specifications
ParameterValue
SeriesPhotoMOS™ AQY
Output typeAC, DC
MountingSurface Mount
Voltage - load0 V ~ 350 V
Voltage - input1.14VDC
Load current130 mA
CircuitSPST-NO (1 Form A)
PackageTube
Case4-SMD (0.300\", 7.62mm)
Termination styleGull Wing
On-State resistance25 Ohms

Product details

130 mA solid-state relay with 350 V AC/DC blocking

The AQY210EHA is a 1 Form A (SPST-NO) PhotoMOS relay from the Panasonic AQY series, rated for 130 mA continuous load current and 350 V peak off-state voltage across AC or DC loads. The 25 Ohm maximum on-state resistance means the voltage drop at full load is about 3.25 V — negligible for signal switching but a factor in low-voltage analog paths where the relay sits in series with a precision reference or sensor excitation line.

Surface-mount package and input drive

Housed in a 4-SMD package (7.62 mm body width) with gull-wing leads, the relay mounts on standard 0.300-inch (7.62 mm) DIP footprint pads. Output is bidirectional AC/DC, so polarity does not matter for the load circuit.

Frequently asked questions

What is the on-state resistance of AQY210EHA?

25 Ohms maximum at rated load. This resistance determines the voltage drop across the relay — at 130 mA the drop is 3.25 V, which matters for low-voltage signal paths but is acceptable for most switching applications.

What package does AQY210EHA come in?

4-SMD (0.300", 7.62 mm) with gull-wing leads for surface-mount assembly. The footprint matches a standard DIP-4 layout.