NXP LPC2100 series ARM7 MCU, LPC2194JBD64,151, 16/32-Bit core at 60 MHz, 256 KB Flash, 16K x 8 RAM, 46 I/O, CANbus, I²C, SPI, UART, 64-LQFP, -40°C to 105°C.
| Parameter | Value |
|---|---|
| Series | LPC2100 |
| Mounting | Surface Mount |
| Oscillator type | Internal |
| Program memory type | FLASH |
| Voltage - supply (Vcc (Vdd)) | 1.65V ~ 3.6V |
| Operating temperature | -40°C ~ 105°C (TA) |
| Speed | 60MHz |
| Package | Bag |
| RAM size | 16K x 8 |
| Core size | 16/32-Bit |
| Peripherals | POR, PWM, WDT |
| Connectivity | CANbus, I²C, Microwire, SPI, SSI, SSP, UART/USART |
| Number of i (O) | 46 |
| Core processor | ARM7® |
| Case | 64-LQFP |
| Data converters | A/D 4x10b |
| Program memory size | 256KB (256K x 8) |
The 60 MHz ARM7 core handles CANbus message processing and UART data streams without a separate protocol coprocessor. For a typical industrial gateway polling four CAN nodes and two UART ports, the core leaves margin for application code without stalling the bus.
The 64-LQFP package (10x10 mm body) is a common footprint for ARM7 designs; the 46 I/O lines break out to the peripheral set including the 4-channel 10-bit ADC.
Yes, the LPC2194JBD64,151 integrates a CANbus controller as part of its connectivity set, alongside I²C, SPI, SSI, SSP, Microwire, and UART/USART interfaces.
The LPC2194JBD64,151 is supplied in a 64-LQFP package (10x10 mm body). The pinout follows the standard LPC2194 ARM7 layout; the supplier device package is 64-LQFP (10x10).