Skip to main content
Microchip Technology MCP6281T-E/SN — Memory (DRAM / SRAM / Flash / EEPROM)
Microchip Technology

MCP6281T-E/SN Op-Amp, 5 MHz GBWP, Rail-to-Rail, 8-SOIC

MPNMCP6281T-E/SN
End of Life

Microchip MCP6281T-E/SN, General Purpose Amplifier, 1 Circuit, Rail-to-Rail, 5 MHz Gain Bandwidth, 2.5 V/µs Slew Rate, 2.2 V to 6 V Supply, 8-SOIC, -40°C to 125°C.

$0.78Ref. price · indicative, final on quote
MCP6281T-E/SN datasheet
Packaging8-SOIC (0.154", 3.90mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

MCP6281T-E/SN Technical Specifications
ParameterValue
Output typeRail-to-Rail
Mounting typeSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset3 mV
Voltage - supply span2.2 V
Current - supply450µA
Current - input bias1 pA
Current - output (Channel)25 mA
Operating temperature-40°C ~ 125°C
Gain bandwidth product5 MHz
PackageTape & Reel (TR); Cut Tape (CT)
Slew rate2.5V/µs
Case8-SOIC (0.154\", 3.90mm Width)
Number of circuits1

Product details

Supply range and single-supply operation

The rail-to-rail output swings within millivolts of each rail, preserving dynamic range in low-voltage ADC driver stages. Input common-mode range extends to the negative rail but stops about 1.1 V below the positive rail — fine for ground-referenced signals, but high-side current sensing at 3.3 V needs a different topology.

Speed and drive capability

The 5 MHz gain-bandwidth and 2.5 V/µs slew rate handle audio-band filtering, transducer amplification, and moderate-speed ADC driving. Each channel can source or sink 25 mA, enough to drive a reference input or a small analog meter directly. The 1 pA input bias current suits high-impedance sources like photodiode or pH probe front-ends.

Lifecycle and compliance

Microchip lists the MCP6281T-E/SN as Active. ROHS3 compliant.

Frequently asked questions

Is MCP6281T-E/SN suitable for single-supply applications?

Yes, it is designed for single-supply operation from 2.2 V to 6 V with a rail-to-rail output that swings close to both supply rails.

Is MCP6281T-E/SN RoHS compliant?

Yes, it is ROHS3 compliant.