CAN FD transceiver, 8 Mbps, PDIP-8, industrial temp
The MCP2561FD-E/P is a single-channel CAN FD transceiver from Microchip, supporting data rates up to 8 Mbps over the CAN bus. It provides the physical-layer interface between a CAN protocol controller and the differential bus lines, with a receiver hysteresis of 200 mV for noise immunity. This is a 5V-only transceiver (4.5V to 5.5V supply), so if your CAN controller runs at 3.3V, you will need external level translation or a transceiver with a VIO pin.
Through-hole PDIP-8 package and mounting
Packaged in an 8-lead PDIP-8 (0.300" body width, 7.62 mm pitch), the MCP2561FD-E/P is through-hole mounted — ideal for prototyping, low-volume production, or boards where wave-solder is preferred over reflow. The DIP footprint is standard and easy to hand-solder or socket.
Active lifecycle, no obsolescence pressure
As an active Microchip part, the MCP2561FD-E/P can be sourced through authorized distribution channels. Sourced per RFQ.