146124 logic elements — the gate budget for your RTL
The M2GL150T-FCG1152I is a Microchip IGLOO2 FPGA with 146124 logic elements and 5120000 total RAM bits on-chip. That logic-element count places it in the upper-mid density tier of the IGLOO2 family — enough fabric to hold a soft-core processor, several high-speed interface controllers, and a substantial data-path pipeline without resorting to a larger die. The ball pitch on a 1152 FCBGA is fine enough that a four-layer PCB with blind vias is the practical floor for fan-out.
Industrial junction temperature — no active cooling needed
The 100°C TJ ceiling gives headroom for a 70°C ambient with the FPGA drawing its full dynamic current — no derating curve anxiety at the system thermal review.
Core supply at 1.14 V — dynamic power floor
The core supply voltage is 1.14 V, the lower end of the IGLOO2 operating range. Running the fabric at 1.14 V instead of 1.26 V cuts dynamic power by roughly 10% for the same toggle rate, which matters when the FPGA shares a 12 V rail with a motor drive and every watt of dissipation counts.
For a production BOM this removes the single-source risk that comes with NRND or EOL parts.
What the IGLOO2 fabric means for your design cycle
IGLOO2 is Microchip's flash-based FPGA family — the configuration is non-volatile, so the part powers up already configured without an external SPI flash. That eliminates the boot-loader PROM and the configuration time penalty that SRAM-based FPGAs incur at every power cycle. For a system that must be operational within milliseconds of power-on, this is the deciding feature.