Skip to main content
Microchip Technology AT34C02C-THDD-T — Memory (DRAM / SRAM / Flash / EEPROM)

AT34C02C-THDD-T 2Kbit I²C EEPROM, 900 ns access, 8-TSSOP

MPNAT34C02C-THDD-T
End of Life

Microchip AT34C02C-THDD-T, 2Kbit I²C EEPROM, 900 ns access time, 400 kHz clock, 2.5V to 5.5V supply, 256 x 8 organization, -40°C to 85°C, 8-TSSOP package.

$0.34Ref. price · indicative, final on quote
Packaging8-TSSOP (0.173", 4.40mm Width)
RoHSNot applicable
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

AT34C02C-THDD-T specifications
ParameterValue
Memory typeNon-Volatile
MountingSurface Mount
Supply voltage2.5V ~ 5.5V
Clock frequency400 kHz
Memory interfaceI²C
Operating temperature-40°C ~ 85°C (TA)
PackageBulk
TechnologyEEPROM
Access time900 ns
Memory size2Kbit
Memory formatEEPROM
Case8-TSSOP (0.173\", 4.40mm Width)
Memory organization256 x 8
Write cycle time - word, page5ms

Product details

2Kbit I²C EEPROM with wide supply range

The Microchip AT34C02C-THDD-T is a 2Kbit serial EEPROM with an I²C interface, organized as 256 x 8 bits. The 400 kHz clock frequency and 900 ns access time cover the read timing needs of most microcontroller buses. The 8-TSSOP package (4.40 mm width) is a compact surface-mount footprint suited for space-constrained PCBs in industrial control, telecom, and sensor modules.

The 900 ns access time is the read-cycle ceiling from address to data valid. At 400 kHz I²C, the bus period is 2.5 µs, so the access fits within a single clock cycle with margin. This matters if you are back-to-back reading sequential bytes in a tight polling loop — the EEPROM will not stretch the clock beyond the standard timing budget.

The 8-TSSOP package is a standard JEDEC footprint shared with many other 8-pin serial EEPROMs, so board layout reuse across alternate parts is straightforward.

Frequently asked questions

Is AT34C02C-THDD-T compatible with 3.3V systems?

The I²C interface thresholds scale with VCC, so at 3.3V the input low/high levels meet standard 3.3V logic.

What is the write cycle endurance of AT34C02C-THDD-T?

The evidence does not list a specific endurance figure. Typical serial EEPROMs in this class are rated for 1 million write cycles per byte; verify the exact specification from the full datasheet.

AT34C02C-THDD-T vs AT24C02: can I use them interchangeably?

Both are 2Kbit I²C EEPROMs with 256 x 8 organization and the same 5 ms write-cycle time. The AT34C02C-THDD-T operates from 2.5V to 5.5V, while the AT24C02 family often specifies a 1.7V minimum. Check the supply rail in your design — if you need 1.8V compatibility, the AT24C02 is the better fit; at 3.3V or 5V, the AT34C02C-THDD-T is a drop-in replacement with the same 8-TSSOP footprint.