Skip to main content
Log in
Infineon Technologies IR2153D — Power Management (PMIC / Gate Driver)

IR2153D Half-Bridge Gate Driver, 600 V Bootstrap, 8-PDIP

MPNIR2153D
Obsolete

Infineon IR2153D half-bridge gate driver, 2 N-channel MOSFET outputs, 600 V bootstrap, 10-15.6 V supply, 80/45 ns rise/fall, -40 to 125°C, 8-DIP through-hole package.

$2.5200Ref. price · indicative, final on quote
Infineon Technologies IR2153D datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

IR2153D specifications
ParameterValue
Gate typeN-Channel MOSFET
Input typeRC Input Circuit
Channel typeSynchronous
MountingThrough Hole
Supply voltage10V ~ 15.6V
High side voltage - max (Bootstrap)600 V
Operating temperature-40°C ~ 125°C (TJ)
PackageTube
Case8-DIP (0.300\", 7.62mm)
Number of drivers2
Driven configurationHalf-Bridge
Rise (Fall time)80ns, 45ns

Product details

Half-bridge gate driver with integrated bootstrap diode

The IR2153D is a half-bridge gate driver from Infineon designed to drive two N-channel MOSFETs in a synchronous half-bridge configuration. It integrates a bootstrap diode for the high-side supply, eliminating an external component, and uses an RC input circuit for oscillator timing — a common topology in offline switch-mode power supplies, electronic ballasts, and DC-DC converters up to 600 V bus voltage.

The high-side bootstrap voltage is rated to 600 V maximum, which means this driver can float the high-side gate drive on top of a rectified mains rail (up to about 400 VDC nominal) with margin for transients. The 10 V to 15.6 V supply range matches standard bias rails from auxiliary windings or linear regulators.

Obsolete — last-time-buy and surplus channel

Housed in an 8-DIP (0.300-inch, 7.62 mm body width) through-hole package, the IR2153D is supplied in tube form.

Frequently asked questions

What is the difference between IR2153 and IR2153D?

The IR2153D includes an integrated bootstrap diode, whereas the standard IR2153 requires an external bootstrap diode. Otherwise the two parts share the same half-bridge driver core, 600 V bootstrap rating, and 8-DIP package — the D variant saves one external component on the PCB.

What is the IR2153D used for?

The IR2153D is a half-bridge gate driver for N-channel MOSFETs in offline power supplies, electronic ballasts, DC-DC converters, and motor drives. The 600 V bootstrap rating makes it suitable for applications operating from rectified mains up to about 400 VDC bus, such as 230 VAC input PFC stages and half-bridge resonant converters.