Skip to main content
Infineon Technologies AUIRF3504 — Discrete Semiconductors

AUIRF3504 N-Channel MOSFET, 40 V, 87 A, 9.2 mOhm

MPNAUIRF3504
Active

Infineon AUIRF3504 HEXFET® N-Channel MOSFET, 40 V Vds, 87 A switching current, 9.2 mOhm Rds(on) at 10 Vgs, through-hole, bulk.

$0.87Ref. price · indicative, final on quote
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

AUIRF3504 specifications
ParameterValue
SeriesHEXFET®
FET typeN-Channel
MountingThrough Hole
Operating temperature high-55°C to 175°C(TJ)
Vgs±20 V
Power143.0
Package_typeBulk
Capacitance_uf0.0022
StatusActive
Supply voltage40.0
Vgs(Th) (Max) @ id4 V @ 100µA
Switching current87.0
Rds on (Max) @ id, vgs9.2mOhm @ 52 A, 10 V
Gate charge (Qg) (Max) @ vgs54 nC @ 10 V

Product details

40 V automotive-grade N-channel

The AUIRF3504 is an N-channel HEXFET® MOSFET from Infineon, rated for 40 V drain-source and 87 A switching current — the voltage ceiling gives margin on a 12 V automotive bus during load-dump transients, while the current rating supports high-power solenoids, DC-DC stages, and motor pre-drive circuits.

Temperature range and package

Junction temperature range spans -55 to 175 °C — this is the automotive Grade 0 band, meaning the die and package are qualified for under-hood and engine-bay environments where ambient can reach 125 °C and self-heating adds margin. Through-hole mounting with bulk packaging — the part ships in tubes or trays, not tape-and-reel. For a pick-and-place line, verify the tube compatibility with your feeder system, or plan for manual insertion on lower-volume builds. Maximum gate-source voltage is ±20 V — the gate oxide breakdown threshold. A 10 V drive is safe, but any ringing or overshoot on the gate node must stay within this window; a 15 V Zener clamp across gate-source is common practice in noisy environments.

No pin-compatible direct replacement from the same family is listed — the AUIRF3504 is the baseline order code.

Frequently asked questions

What gate drive voltage does the AUIRF3504 need for minimum on-resistance?

The 4 V max threshold at 100 µA means 5 V logic may not fully enhance the channel, leaving higher conduction loss.