Half-bridge IGBT driver in a 14-SOIC — what it does and where it fits
The Infineon 2EDL23I06PJXUMA1 is a two-channel, independent half-bridge gate driver from the EiceDriver™ family, designed to drive IGBTs in a half-bridge configuration. Each channel delivers 2.3 A peak source and sink current, with a 600 V bootstrap rating for the high-side floating supply. The 48 ns rise and 37 ns fall times (typical) keep switching losses manageable in motor-drive and power-conversion stages running from a 10 V to 25 V supply rail. The part is housed in a PG-DSO-14 footprint and rated for junction temperatures from -40°C to 150°C, suiting it for industrial drives, uninterruptible power supplies, and automotive under-hood inverter modules where ambient heat is a constraint.
2.3 A peak output — sizing the gate drive for your IGBT
The 2.3 A peak source and sink current drives small to medium IGBT modules.
600 V bootstrap — where the voltage ceiling lands
The 600 V high-side bootstrap maximum sets the DC-link voltage limit.
Temperature range — 150°C junction buys margin in hot environments
Rated for -40°C to 150°C junction temperature, this driver handles thermal extremes.
Active lifecycle — no redesign pressure
Infineon lists the 2EDL23I06PJXUMA1 as Active and ROHS3 compliant. There is no last-time-buy notice, no end-of-life risk for the foreseeable production horizon. The part is in current manufacture, so it can be specified into new BOMs without planning a near-term replacement. Compliance documentation (ROHS3) is available from Infineon on request.
Sourcing and supply posture
This part is sourced through independent distribution and quoted to order against an RFQ.