Active production — BOM-fit for AC switching
The Autonics SRS1-A1205 is an active-production signal relay in the SRS1 series, configured as a single-pole single-throw normally-open (SPST-NO, 1 Form A) contact. Rated to switch 5 A continuous load current across 24 V to 240 VAC, it is sized for AC signal routing, pilot-duty lamp loads, or small solenoid valves in control panels. The coil accepts 4 to 24 VDC, a wide pickup range that allows direct drive from a 5 V, 12 V, or 24 V logic output without an external dropping resistor — the relay pulls in reliably across the full band.
Socketable package — field-replaceable without rework
Socketable mounting with plug-in termination means the relay inserts into a standard 8- or 11-pin octal-style socket (per the SRS1 family footprint). Replacement takes seconds with the panel live — no soldering iron, no board removal. This is the standard form factor for industrial relay banks where maintenance uptime matters.