Skip to main content
Log in
Autonics SRS1-A1202 — Signal Relays

Autonics SRS1-A1202 SSR, SPST-NO, 2 A, 24~240 VAC

MPNSRS1-A1202
Active

Autonics SRS1 series, SRS1-A1202, solid-state relay, SPST-NO (1 Form A), 2 A load current, 24~240 VAC load voltage, 4~24 VDC input, socketable, plug-in terminals.

$23.9500Ref. price · indicative, final on quote
Autonics SRS1-A1202 datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

SRS1-A1202 specifications
ParameterValue
SeriesSRS1
Output typeAC
MountingSocketable
Voltage - load24 V ~ 240 V
Voltage - input4 ~ 24VDC
Load current2 A
CircuitSPST-NO (1 Form A)
PackageBox
Termination stylePlug In

Product details

The Autonics SRS1-A1202 is a solid-state relay in the SRS1 series, switching AC loads up to 2 A across 24~240 VAC with a DC control side accepting 4~24 VDC. The SPST-NO (1 Form A) contact arrangement gives you a simple on/off isolation path for one load — no latching, no polarity concerns on the output. Typical deployment is in industrial panel builds: PLC output to a heater contactor, motor starter coil, or solenoid valve where silent, bounce-free switching matters and cycle life exceeds what an electromechanical relay delivers.

Mounting and wiring

Socketable with plug-in termination — mates to a standard 8-pin or 11-pin octal-style relay socket (not included). The plug-in design means you can pull the SSR for replacement without disturbing panel wiring. Termination style is plug-in, so the socket handles the screw-clamp or quick-connect terminations. Mount the socket on DIN rail or panel, insert the SSR, and you are wired.

Autonics lists the SRS1-A1202 as Active.

Frequently asked questions

What is the load current and voltage rating for SRS1-A1202?

The load side is rated for 2 A continuous AC current over a voltage range of 24~240 VAC. Output type is AC only.

Does SRS1-A1202 come with a socket?

No. The SSR itself is socketable with plug-in terminals, but the mating socket is not included. You order the socket separately — standard 8-pin or 11-pin octal-style relay socket.

What is the cross reference for SRS1-A1202?

The evidence does not list a direct cross-reference or second-source part. For a pin-compatible alternative within the same family, look at other SRS1 series variants with different load current or voltage ratings — the base product number is SRS1-A.