Maxim Integrated MAX700CSA+, Simple Reset/Power-On Reset supervisor IC, 1 channel, active high/active low push-pull outputs, 200ms minimum reset timeout, 0°C to 70°C, 8-SOIC surface mount package.
| Parameter | Value |
|---|---|
| Type | Simple Reset/Power-On Reset |
| Mounting | Surface Mount |
| Voltage - threshold | Adjustable/Selectable |
| Number of voltages monitored | 1 |
| Operating temperature | 0°C ~ 70°C (TA) |
| Reset | Active High/Active Low |
| Output | Push-Pull, Push-Pull |
| Package | Tube |
| Reset timeout | 200ms Minimum |
| Case | 8-SOIC (0.154\", 3.90mm Width) |
The MAX700CSA+ is a single-channel voltage supervisor from Maxim Integrated that monitors a system supply rail and holds the processor in reset until the supply is stable. It provides both active-high and active-low push-pull reset outputs, so you can drive either polarity of reset input without an external inverter. The reset timeout is a minimum of 200 ms, which gives the power rail time to settle after it crosses the threshold.
The reset timeout is a minimum of 200 ms. That is the guaranteed hold time before the reset outputs release after the supply voltage rises above the threshold.
Yes, it provides both active-high and active-low push-pull reset outputs. You can use either or both to drive different reset inputs on the same board without external inversion.