Analog Devices MAX3072EESA+T, RS-422/RS-485 transceiver, half-duplex, 1/1 driver/receiver, 250 kbps, 3V–3.6V supply, –40°C to +85°C, 8-SOIC package.
| Parameter | Value |
|---|---|
| Type | Transceiver |
| Mounting | Surface Mount |
| Voltage | 3V ~ 3.6V |
| Protocol | RS422, RS485 |
| Operating temperature | -40°C ~ 85°C |
| Duplex | Half |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Data rate | 250kbps |
| Case | 8-SOIC (0.154\", 3.90mm Width) |
| Receiver hysteresis | 100 mV |
| Number of drivers (Receivers) | 1/1 |
It handles 250 kbps on a 3V to 3.6V supply rail, with 100 mV of receiver hysteresis.
The supply range is 3V to 3.6V, which means this part runs on a nominal 3.3V rail. A 5V supply will exceed the absolute maximum and damage the device. If your existing bus is 5V, you need a level translator or a 5V-tolerant transceiver variant.
No, the MAX3072EESA+T has an Active lifecycle status with no end-of-life or last-time-buy notice in effect. It remains suitable for production and new designs.
No. The supply voltage range is 3V to 3.6V — a 5V rail exceeds the rated maximum and will damage the device. Use a 3.3V rail or choose a 5V-tolerant transceiver.