Maxim Integrated MAX11662AUB+T, 8-bit SAR ADC, 500k samples per second, 2 single-ended inputs, SPI data interface, 2.2V to 3.6V supply, -40°C to 125°C, 10-uMAX-EP package.
| Parameter | Value |
|---|---|
| Input type | Single Ended |
| Mounting | Surface Mount |
| Reference type | External |
| Voltage - supply, analog | 2.2V ~ 3.6V |
| Voltage - supply, digital | 2.2V ~ 3.6V |
| I/O channels | 2 |
| Interface | SPI |
| Operating temperature | -40°C ~ 125°C |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Architecture | SAR |
| Configuration | MUX-S/H-ADC |
| Number of bits | 8 |
| Case | 10-TFSOP, 10-MSOP (0.118\", 3.00mm Width) Exposed Pad |
| Ratio - s (H:ADC) | 1:1 |
| Number of a (D converters) | 1 |
| Sampling rate (Per second) | 500k |
At 500k samples per second this is a fast 8-bit converter — suited for digitising high-frequency sensor bursts, current-sense waveforms, or level-shifted analog signals where 8 bits of resolution is enough.
It has two single-ended analog inputs selected through an internal mux. The input configuration is single-ended, not differential.
Yes, the reference type is external. There is no internal bandgap reference — the designer must supply a clean VREF to set the ADC's full-scale range.