Skip to main content
Log in
Vishay DG213DQ-T1-E3 — Microcontrollers & Processors (MCU / MPU / DSP)

DG213DQ-T1-E3 Vishay SPST-NO/NC Analog Switch, 60 Ohm

MPNDG213DQ-T1-E3
End of Life

Vishay Siliconix DG213DQ-T1-, quad SPST-NO/NC analog switch, 60 Ohm max on-resistance, 1 pC charge injection, -95 dB crosstalk at 100 kHz, 16-TSSOP package, -40 to 85 °C, ROHS3 compliant.

$2.77Ref. price · indicative, final on quote
Vishay DG213DQ-T1-E3 datasheet (PDF)
Packaging16-TSSOP (0.173", 4.40mm Width)
RoHSROHS3 Compliant
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

DG213DQ-T1-E3 specifications
ParameterValue
MountingSurface Mount
Voltage - supply, dual (V±)±7V ~ 22V
Voltage - supply, single (V+)13V ~ 36V
Current - leakage (IS(off))500pA
Operating temperature-40°C ~ 85°C (TA)
PackageTape & Reel (TR); Cut Tape (CT)
Crosstalk-95dB @ 100kHz
Case16-TSSOP (0.173\", 4.40mm Width)
Switch circuitSPST - NO/NC
Charge injection1pC
Number of circuits4
On-State resistance60Ohm
Switch time (Ton, toff)130ns, 100ns
Multiplexer (Demultiplexer circuit)1:1
Channel-to-Channel matching (ΔRon)1Ohm
Channel capacitance (CS(off), CD(off))5pF, 5pF

Product details

The DG213DQ-T1-E3: The DG213DQ-T1-: The Vishay Siliconix DG213DQ-T1- is a quad SPST-NO/NC analog switch in a 16-TSSOP package. Each of the four independent switches can be configured as normally-open or normally-closed, giving the designer flexibility in signal routing without external inverters. The part is built for precision analog applications where low on-resistance and tight channel matching matter. Key parametrics: 60 ohm max on-resistance with 1 ohm channel-to-channel matching, 1 pC charge injection, and -95 dB crosstalk at 100 kHz. Switching times are 130 ns (ton) and 100 ns (toff). Leakage current is 500 pA max. Supply flexibility is a standout: it runs from a single supply of 13 V to 36 V, or dual supplies of ±7 V to ±22 V. That puts it in the high-voltage analog switch class — think audio signal routing, precision data acquisition, ATE, and industrial sensor multiplexing.

If your design uses ±15 V op-amp rails, this switch fits directly.

Crosstalk and charge injection — the precision analog story

With -95 dB crosstalk at 100 kHz and 1 pC charge injection, this switch is well-suited for audio and precision analog multiplexing where signal integrity matters. The low charge injection keeps glitches small when switching sample-and-hold circuits or DAC outputs.

Housed in a 16-TSSOP (4.40 mm width) package, surface mount. The supplier device package is 16-TSSOP.

The DG213DQ-T1- carries an active lifecycle status. It is ROHS3 compliant. No last-time-buy or obsolescence risk at this time.

Frequently asked questions

Can DG213DQ-T1- operate with a single +3.3V supply?

No. The minimum single-supply voltage is 13 V. For 3.3 V systems, look at a different switch family.

What is the equivalent or replacement for DG213DQ-T1-?

The closest functional equivalent within the same family is the DG213DY-T1-. It shares the same switch circuit, on-resistance, charge injection, crosstalk, and supply range, but comes in a different package (SOIC-16 instead of TSSOP-16). Check the footprint before substituting.

How does DG213DQ-T1- compare to ADG213?

The ADG213 is a direct competitor from Analog Devices with similar quad SPST-NO/NC configuration and supply range. The Vishay part offers -95 dB crosstalk at 100 kHz and 1 pC charge injection; ADI's datasheet should be checked for its own specs. Pin compatibility varies by package — the DG213DQ-T1- is in 16-TSSOP, while ADG213 is often in SOIC or TSSOP. Verify the footprint before cross-referencing.