Skip to main content
TDK Corporation ACM1211-701-2PL-TL01 — EMI Filters & Ferrite Beads

TDK ACM1211-701-2PL-TL01 Power Line Choke, 8A, 700 Ohm

MPNACM1211-701-2PL-TL01
Active

TDK Corporation ACM series power line common-mode filter, ACM1211-701-2PL-TL01, 2-line, 700 Ohms @ 100 MHz, 8A, 80V DC, 6mOhm DCR, surface mount, horizontal 4-pad package.

$2.0400Ref. price · indicative, final on quote
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

ACM1211-701-2PL-TL01 specifications
ParameterValue
SeriesACM
Filter typePower Line
MountingSurface Mount
Voltage rating - DC80V
Current rating8A
Impedance @ frequency700 Ohms @ 100 MHz
Operating temperature-40°C ~ 85°C
Height0.236\" (6.00mm)
Size (Dimension)0.472\" L x 0.433\" W (12.00mm x 11.00mm)
PackageTape & Reel (TR) Cut Tape (CT)
CaseHorizontal, 4 PC Pad
Number of lines2
DC resistance (DCR)6mOhm

Product details

Power-line common-mode choke, 8 A continuous

The TDK ACM1211-701-2PL-TL01 is a two-line common-mode filter from the ACM series, built for power-line EMI suppression. It carries 8 A continuous with a DCR of 6 mOhm max — the low resistance means minimal heat in the power path, so it fits on a supply rail without derating for self-heating. Impedance hits 700 Ohms at 100 MHz, which knocks down conducted common-mode noise in the 30-300 MHz range — the band where most switching-regulator harmonics live. The 80 V DC rating covers 48 V telecom rails and 60 V industrial buses with margin.

Board-fit and temperature range

Surface-mount in a horizontal 4-pad package, 12.0 x 11.0 mm footprint, 6.0 mm seated height. The low profile suits tight enclosures where a vertical can would hit the lid. Operating from -40 to 85 °C, it handles outdoor cabinet duty and unheated factory floors.

Frequently asked questions

What is the impedance rating of this filter?

700 Ohms at 100 MHz, typical for suppressing conducted common-mode noise from switching supplies in the VHF band.

What is the maximum DC resistance?

6 mOhm max. At 8 A continuous, the I²R loss is under 0.4 W — negligible for most power rails.