Skip to main content
ROHM Semiconductor UMA5NTR — Memory (DRAM / SRAM / Flash / EEPROM)

UMA5NTR Dual PNP Pre-Biased Transistor, 50V, 100mA, SOT-353

MPNUMA5NTR
End of Life

ROHM Semiconductor UMA5NTR, dual PNP pre-biased transistor, 50V Vce, 100mA Ic, 250MHz ft, R1=2.2kΩ, R2=47kΩ, 150mW, SOT-353/UMT5 package, Surface Mount.

$0.34Ref. price · indicative, final on quote
Packaging5-TSSOP, SC-70-5, SOT-353
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

UMA5NTR Technical Specifications
ParameterValue
Mounting typeSurface Mount
FET type2 PNP - Pre-Biased (Dual)
Voltage - collector emitter breakdown50V
Current - collector (Ic)100mA
Current - collector cutoff500nA
DC current gain (hFE) (Min) @ ic, vce80 @ 10mA, 5V
Power - max150mW
Frequency250MHz
PackageTape & Reel (TR); Cut Tape (CT)
Case5-TSSOP, SC-70-5, SOT-353
Resistor - base (R1)2.2kOhms
Resistor - emitter base (R2)47kOhms
Vce saturation (Max) @ ib, ic300mV @ 250µA, 5mA

Product details

Dual PNP pre-biased in a small SOT-353 footprint

The ROHM UMA5NTR packs two PNP transistors with integrated bias resistors into a single SOT-353 (UMT5) package. Each transistor includes a 2.2 kΩ base resistor (R1) and a 47 kΩ resistor (R2) between base and emitter, which eliminates the need for external resistor pairs in switching and interface circuits. The dual configuration saves board space and simplifies layout in applications like relay drivers, logic-level shifters, and inverter circuits where two PNP pre-biased devices are needed.

Ratings and operating margins

Collector-emitter breakdown is rated at 50 V, with a maximum collector current of 100 mA per transistor. The 150 mW total power dissipation limits the package-level thermal budget — at 50 V the practical continuous current is well below 100 mA unless derated. Vce saturation is specified at 300 mV at 250 µA base current and 5 mA collector current, which gives a clean on-state voltage for 5 V logic-level loads. DC current gain minimum is 80 at 10 mA, 5 V, so the pre-biased resistors are designed to guarantee adequate drive for low-current switching.

Frequently asked questions

Is UMA5NTR a dual NPN or PNP?

UMA5NTR is a dual PNP pre-biased transistor. Each of the two transistors has integrated base and emitter resistors (R1 = 2.2 kΩ, R2 = 47 kΩ). For a dual NPN equivalent with the same resistor values, the closest functional counterpart is UMH10NTN.

Is UMA5NTR compatible with SOT-353?

Yes, the UMA5NTR package is listed as 5-TSSOP, SC-70-5, SOT-353, and the supplier device package is UMT5. All refer to the same 5-pin surface-mount footprint, so it is fully compatible with a SOT-353 land pattern.