Skip to main content
ROHM Semiconductor TLR344FJ-GE2 — Microcontrollers & Processors (MCU / MPU / DSP)
ROHM Semiconductor

ROHM TLR344FJ-GE2 CMOS Op-Amp, Quad, Rail-to-Rail, 2.3 MHz

MPNTLR344FJ-GE2
End of Life

ROHM TLR344FJ-GE2 CMOS quad op-amp, 2.3 MHz GBW, 1.2 V/µs slew rate, rail-to-rail output, 1.8–5.5 V supply, 280 µA supply current, 14-SOIC package, -40°C to 85°C.

$1.5Ref. price · indicative, final on quote
TLR344FJ-GE2 datasheet
Packaging14-SOIC (0.154", 3.90mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

TLR344FJ-GE2 Technical Specifications
ParameterValue
Output typeRail-to-Rail
Mounting typeSurface Mount
Amplifier typeCMOS
Voltage - input offset300 µV
Voltage - supply span5.5 V
Current - supply280µA
Current - input bias1 pA
Current - output (Channel)120 mA
Operating temperature-40°C ~ 85°C
Gain bandwidth product2.3 MHz
PackageTape & Reel (TR); Cut Tape (CT)
Slew rate1.2V/µs
Case14-SOIC (0.154\", 3.90mm Width)
Number of circuits4

Product details

Quad CMOS op-amp for general-purpose signal chains

The ROHM TLR344FJ-GE2 is a quad CMOS operational amplifier in a SOPJ package, offering rail-to-rail output swing and a gain-bandwidth product of 2.3 MHz.

Supply current and output drive — the BOM trade-off

At 280 µA total supply, the TLR344FJ-GE2 is a low-power quad CMOS op-amp. The 120 mA per-channel output capability is unusual for this current class.

1 pA input bias — high-impedance sensor interface

The CMOS input stage delivers 1 pA typical input bias current, which means negligible voltage error when interfacing with high-impedance sources like photodiodes, pH probes, or piezoelectric sensors. Note that the input common-mode range is not rail-to-rail — the datasheet should be checked for the exact limits, but for many single-supply applications with mid-rail biasing, this is not a limitation.

Frequently asked questions

What is the supply current of TLR344FJ-GE2?

The total supply current for all four amplifiers is 280 µA typical, which works out to 70 µA per channel. This is the quiescent current with no load.