1.5 MHz gain-bandwidth and 0.42 V/µs slew rate — signal conditioning fit
The LMR932FV-GE2: With a 1.5 MHz gain-bandwidth product, this op-amp handles audio-band signals and sensor conditioning up to roughly 150 kHz at a gain of 10 before the open-loop gain rolls off — adequate for thermocouple amplifiers, photodiode front-ends, and motor-current shunt monitors. The 0.42 V/µs slew rate means the output can swing 1 V in about 2.4 µs, which limits full-power bandwidth to roughly 67 kHz at a 1 V output swing — fine for DC and low-frequency AC signals, but not for high-speed pulse or video applications.
140 µA supply and 1.8 V minimum — low-power sensor interface
Drawing 140 µA total supply current for both amplifiers, the LMR932FV-GE2 fits battery-operated equipment where every microamp counts — a pair of these in a data-acquisition front-end adds under 300 µA to the system budget.