Skip to main content
Log in
ROHM Semiconductor LM4559FVM-GTR — Analog & Data Acquisition

LM4559FVM-GTR Dual Op Amp, 4 MHz GBWP, 8-MSOP

MPNLM4559FVM-GTR
End of Life

ROHM LM4559FVM-GTR dual general-purpose operational amplifier, 4 MHz gain bandwidth, 3.5 V/µs slew rate, 8 V to 36 V supply, 8-MSOP package, -40°C to 85°C.

$1.15Ref. price · indicative, final on quote
ROHM Semiconductor LM4559FVM-GTR datasheet (PDF)
Packaging8-VSSOP, 8-MSOP (0.110", 2.80mm Width)
RoHSROHS3 Compliant
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

LM4559FVM-GTR specifications
ParameterValue
MountingSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset500 µV
Voltage - supply span36 V
Current - supply3.3mA
Current - input bias40 nA
Operating temperature-40°C ~ 85°C
Gain bandwidth product4 MHz
PackageTape & Reel (TR); Cut Tape (CT)
Slew rate3.5V/µs
Case8-VSSOP, 8-MSOP (0.110\", 2.80mm Width)
Number of circuits2

Product details

It operates from a single or split supply spanning 8 V to 36 V, drawing 3.3 mA quiescent current per amplifier.

The 8 V to 36 V supply span lets you run this part from ±4 V to ±18 V dual rails or a single 9 V to 36 V rail. That covers standard industrial supplies (12 V, 24 V) and audio rails (±12 V, ±15 V) without a secondary regulator.

Housed in an 8-MSOP (0.110", 2.80 mm width) surface-mount package, the LM4559FVM-GTR fits tight mixed-signal layouts where board area is at a premium. The MSOP-8 footprint is common across ROHM's dual-op-amp family, so a layout can often accommodate a swap to the LM4559FVJ-GE2 (same die, different reel suffix) without a board spin.

Frequently asked questions

Is LM4559FVM-GTR a dual op amp?

Yes, it contains two independent general-purpose operational amplifiers in a single 8-MSOP package.

What is the slew rate of LM4559FVM-GTR?

The slew rate is 3.5 V/µs, which is adequate for audio-frequency signals up to about 100 kHz at full output swing and faster for smaller signal excursions.