Skip to main content
ROHM Semiconductor BU7245HFV-TR — Memory (DRAM / SRAM / Flash / EEPROM)
ROHM Semiconductor

BU7245HFV-TR General Purpose Op-Amp, 70 kHz GBW

MPNBU7245HFV-TR
End of Life

ROHM BU7245HFV-TR, General Purpose Amplifier, 1 Circuit, Rail-to-Rail Output, 70 kHz Gain Bandwidth, 0.035 V/µs Slew Rate, 1.8 V to 5.5 V Supply, SOT-665, -40°C to 85°C.

$1.47Ref. price · indicative, final on quote
BU7245HFV-TR datasheet
PackagingSOT-665
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

BU7245HFV-TR Technical Specifications
ParameterValue
Output typeRail-to-Rail
Mounting typeSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset1 mV
Voltage - supply span5.5 V
Current - supply5µA
Current - input bias1 pA
Current - output (Channel)8 mA
Operating temperature-40°C ~ 85°C
Gain bandwidth product70 kHz
PackageTape & Reel (TR); Cut Tape (CT)
Slew rate0.035V/µs
CaseSOT-665
Number of circuits1

Product details

70 kHz GBW, 5 µA supply — the low-power signal chain choice

The ROHM BU7245HFV-TR is a single-channel general-purpose CMOS op-amp designed for applications where supply current is the primary constraint. The rail-to-rail output stage swings within millivolts of both supply rails, preserving dynamic range at the low 1.8 V minimum supply. Input bias current is 1 pA, so it won't load high-impedance sources like pH probes or pyroelectric sensors.

Rail-to-rail output means the amplifier can swing close to the supply rails, useful when the ADC reference is the same supply. Input offset voltage is 1 mV typical, which stacks directly into the error budget for precision DC measurements.

Package and temperature grade

Housed in a 5-pin SOT-665 (also designated 5-HVSOF), the package is a surface-mount, leadless footprint.

Lifecycle and sourcing posture

It is RoHS3 compliant.

Frequently asked questions

Does BU7245HFV-TR support rail-to-rail output?

Yes, the output type is rail-to-rail, allowing the output to swing close to both supply rails. This preserves dynamic range, especially at the low 1.8 V supply end.

What is the equivalent or replacement for BU7245HFV-TR?

Within the ROHM family, the BU7241G-TR offers a higher 900 kHz GBW and 0.4 V/µs slew rate but draws 100 µA supply current — a different power-vs-speed trade-off. The BU7271SG-TR and BU7421SG-TR run at 90 kHz GBW with a 0.05 V/µs slew rate and operate to 105°C, but come in different packages. None are pin-for-pin identical; check the package and supply current against your BOM requirements.