ROHM BD8876FV-, General Purpose Amplifier, 1 Circuit, 3V/µs Slew Rate, 3V to 5.5V Supply, -40°C to 85°C, Surface Mount 14-LSSOP.
| Parameter / Attribute | Specification / Value |
|---|---|
| Mounting | Surface Mount |
| Amplifier type | General Purpose |
| Voltage - input offset | 500 µV |
| Voltage - supply span | 5.5 V |
| Current - supply | 3.2mA |
| Operating temperature | -40°C ~ 85°C |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Slew rate | 3V/µs |
| Case | 14-LSSOP (0.173\", 4.40mm Width) |
| Number of circuits | 1 |
Factory lead times blocking production? We lock verified brand-new original stock in Shenzhen within 2 hours.
Direct access to Shenzhen floor inventory, franchised allocation buffers, and factory bonded stock to resolve line-down shutdowns.
Standard factory-sealed packaging compliant with EIA-481 standards for automated high-speed SMT pick-and-place lines.
High-resolution photos of original reel labels, 2D DataMatrix, and pin coplanarity sent via WhatsApp/Telegram before you release wire payment.
The BD8876FV-E2: The 3V/µs slew rate and 500 µV input offset voltage are specified in the datasheet.
The 14-LSSOP package is 4.40 mm wide (0.173") and the supplier device package is 14-SSOP-B.
This is not a part I would squirrel away a lifetime buy for; it should remain available for routine production replenishment.
It is a single-circuit (one channel) general-purpose op-amp. If the board needs two amplifiers in one package, the LM4559FVJ-GE2 or BA4560RF- are dual-channel alternatives in similar SSOP footprints.
No — the lifecycle status is active. No discontinuation notice or last-time-buy has been issued.