Skip to main content
ROHM Semiconductor BD30IC0WEFJ-E2 — Power Management (PMIC / Gate Driver)

BD30IC0WEFJ-E2 ROHM LDO Regulator, 3V Fixed, 1A, 8-HTSOP

MPNBD30IC0WEFJ-E2
End of Life

ROHM Semiconductor BD30IC0WEFJ- LDO voltage regulator, fixed 3V output, 1A, 8-HTSOP-J (8-SOIC exposed pad), surface mount, tape and reel.

$0.9Ref. price · indicative, final on quote
Packaging8-SOIC (0.154", 3.90mm Width) Exposed Pad
RoHSROHS3 Compliant
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

BD30IC0WEFJ-E2 specifications
ParameterValue
Output typeFixed
MountingSurface Mount
Voltage - input5.5V
Voltage dropout0.6V @ 1A
Voltage - output (Min (Fixed))3V
Output current1A
Current - supply500 µA
Current - quiescent0.25 mA
Operating temperature-25°C ~ 85°C
PackageTape & Reel (TR); Cut Tape (CT)
Case8-SOIC (0.154\", 3.90mm Width) Exposed Pad
Control featuresEnable
Protection featuresOver Current, Over Temperature, Soft Start
Number of regulators1
Output configurationPositive

Product details

Regulator identity and board-fit

The BD30IC0WEFJ-E2: The BD30IC0WEFJ- is a positive fixed-output LDO from ROHM, delivering a regulated 3 V rail at up to 1 A from a 5.5 V maximum input.

Dropout and quiescent draw

Quiescent current is 0.25 mA typical, with a maximum supply current of 500 µA; the enable pin (active-high) can shut the regulator down to near-zero draw when the load is idle.

Protection and compliance

On-chip protection includes over-current, over-temperature, and soft-start — the soft-start limits inrush into capacitive loads at power-up.

Frequently asked questions

How can I order BD30IC0WEFJ- or check availability?

The BD30IC0WEFJ- is an active ROHM part, sourced to order against an RFQ.