Skip to main content
Log in
Panjit International Inc. 1.5SMCJ78A_R1_00001 — Circuit Protection

1.5SMCJ78A_R1_00001 TVS Diode, 78V Standoff, SMC

MPN1.5SMCJ78A_R1_00001
Active

Panjit International Inc. Zener TVS diode, 1.5SMCJ series, 1.5SMCJ78A_R1_00001, unidirectional 78V standoff, 126V clamp, 11.4A peak pulse, 1500W peak power, SMC (DO-214AB) surface mount, -55°C to 150°C junction temperature, active.

$0.6500Ref. price · indicative, final on quote
Panjit International Inc. 1.5SMCJ78A_R1_00001 datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

1.5SMCJ78A_R1_00001 specifications
ParameterValue
TypeZener
Series1.5SMCJ
MountingSurface Mount
Voltage - breakdown86.7V
Voltage - clamping (Max) @ ipp126V
Voltage - reverse standoff78V
Current - peak pulse (10/1000μs)11.4A
Power - peak pulse1500W (1.5kW)
Power line protectionNo
Operating temperature-55°C~150°C(TJ)
PackageTape & Reel (TR); Cut Tape (CT)
ApplicationsGeneral Purpose
CaseDO-214AB, SMC
Unidirectional channels1

Product details

What the clamping spec means on the bench

The 1.5SMCJ78A_R1_00001: The 150 °C ceiling means this part can sit near a heat source or in an enclosed panel without derating below its listed peak pulse rating, which matters for outdoor enclosures and motor-drive compartments that run hot.

SMC package and what it means for board assembly

The tape-and-reel packaging suits high-volume pick-and-place, while cut-tape is available for low-quantity bring-up boards without committing to a full reel.

Listed as active by Panjit International Inc. — no EOL notice or official successor appears in the cross-reference record, so this is the current line item. No cross-reference or pin-compatible alternative is listed under the same series for this standoff voltage, so confirm the BOM position before committing to a second source.

Frequently asked questions

What type of protection does 1.5SMCJ78A_R1_00001 provide?

It is a unidirectional TVS Zener diode: the 78 V standoff keeps the line normal until a transient exceeds the breakdown threshold at 86.7 V minimum, then the device clamps the voltage to 126 V maximum and dissipates the surge energy at 1500 W peak pulse. It does not provide power-line protection (the line-protection flag is set to No), so it guards individual signal or rail nodes rather than an entire AC mains input.

What series and package is 1.5SMCJ78A_R1_00001?

It belongs to the 1.5SMCJ series and ships in the SMC (DO-214AB) surface-mount package. The supplier device package field lists SMC (DO-214AB) — the two naming conventions refer to the same JEDEC outline.