Skip to main content
Log in
onsemi H11A2FVM — Optoisolators

onsemi H11A2FVM Optoisolator, 7500Vpk, 6-SMD Gull Wing

MPNH11A2FVM
Obsolete

onsemi H11A2FVM Optoisolator, DC input, Transistor with Base output, 1 Channel, 7500Vpk isolation, 6-SMD Gull Wing, Surface Mount, Bulk.

onsemi H11A2FVM datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

H11A2FVM specifications
ParameterValue
Input typeDC
Output typeTransistor with Base
MountingSurface Mount
Voltage - isolation7500Vpk
Voltage - output30V
Voltage - forward (Vf)1.18V
Current transfer ratio20% @ 10mA
Current - DC forward (If)60 mA
Operating temperature-40°C~100°C
PackageBulk
Case6-SMD, Gull Wing
Channels1
Vce saturation400mV
Turn on (Turn off time)2µs, 2µs

Product details

The H11A2FVM is marked Obsolete by onsemi.

7500Vpk isolation — what it means for the BOM

Rated at 7500Vpk isolation voltage, this optoisolator provides a reinforced barrier between the low-voltage control side and the high-voltage load side. In a motor drive or medical monitor, that margin covers transient surges without breakdown — the 2 µs typical turn-on/turn-off time keeps the signal path fast enough for logic-level switching at moderate data rates.

Parametric fit — CTR, Vf, and switching speed

Minimum current transfer ratio is 20% at 10 mA forward current. Typical forward voltage is 1.18 V.

Surface-mount package — 6-SMD Gull Wing

Housed in a 6-SMD Gull Wing package (supplier device package 6-SMD).

Frequently asked questions

What is the closest pin-compatible alternative to H11A2FVM?

The H11A series shares the same base footprint (6-SMD Gull Wing), but each CTR bin and isolation rating differs — verify the BOM position's CTR and isolation requirements against the H11A family datasheet before substituting.