Skip to main content
Omron E3T-FT13 — Interface & Transceivers
Omron

Omron E3T-FT13 Through-Beam Sensor, 500 mm, PNP, IP67

MPNE3T-FT13
Active

Omron E3T series through-beam photoelectric sensor, E3T-FT13, PNP open-collector Light-ON output, 500 mm sensing distance, 12 V supply, IP67, cable connection, -25 to 55 °C operating temperature.

$148.74Ref. price · indicative, final on quote
E3T-FT13 datasheet
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

E3T-FT13 Technical Specifications
ParameterValue
SeriesE3T
Connection_methodCable
Operating temperature high-25°C to 55°C
Ip_ratingIP67
Output_typePNP - Open Collector/Light-ON
Light_sourceRed (650nm)
Package_typeBulk
Sensing_typeThrough-Beam
Response_time_ms1
Supply_voltage_v12
Sensing_distance_max_mm19.685

Product details

500 mm through-beam — what it means on the line

The Omron E3T-FT13 is a through-beam photoelectric sensor with a 500 mm sensing distance, PNP open-collector output configured Light-ON, and a red LED source at 650 nm. Through-beam gives the most reliable detection across a gap — no false triggers from target color or reflectivity — but requires an emitter and receiver aligned on opposite sides of the path. The 500 mm range suits conveyor belts, part-present checks on packaging lines, and edge detection in assembly fixtures where the gap is under half a meter. IP67 means the housing handles washdown and dust; the cable connection is fixed, no quick-disconnect option.

1 ms response — fast enough for most discrete parts

Response time is 1 ms. That covers typical conveyor speeds for boxes, bottles, and small parts.

Frequently asked questions

Will the E3T-FT13 drop into a panel wired for an E3T-FT11?

No — the E3T-FT13 is PNP Light-ON, while the E3T-FT11 is NPN Light-ON. The mechanical footprint and sensing distance are identical, but the output polarity is reversed. The wiring must be changed to match the PLC input card's sink/source configuration.

What is the sensing distance and output type of the E3T-FT13?

The E3T-FT13 has a 500 mm through-beam sensing distance with a PNP open-collector Light-ON output. It uses a red LED light source at 650 nm.