Skip to main content
Infineon Technologies S25FL512SAGMFIG10 — Memory (DRAM / SRAM / Flash / EEPROM)

S25FL512SAGMFIG10 512Mbit NOR Flash, 133 MHz SPI Quad I/O

MPNS25FL512SAGMFIG10
Active

Infineon FL-S series, S25FL512SAGMFIG10, 512Mbit NOR Flash, SPI - Quad I/O interface, 133 MHz clock, 2.7V-3.6V supply, -40°C to 85°C, 16-SOIC (7.50mm width), Tray.

$9.6500Ref. price · indicative, final on quote
Packaging16-SOIC (0.295", 7.50mm Width)
RoHSROHS3 Compliant
SeriesFL-S
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

S25FL512SAGMFIG10 specifications
ParameterValue
SeriesFL-S
Memory typeNon-Volatile
MountingSurface Mount
Voltage2.7V ~ 3.6V
Frequency133 MHz
Memory interfaceSPI - Quad I/O
Operating temperature-40°C ~ 85°C (TA)
PackageTray
TechnologyFLASH - NOR
Memory size512Mbit
Memory formatFLASH
Case16-SOIC (0.295\", 7.50mm Width)
Memory organization64M x 8

Product details

512 Mbit NOR Flash with Quad SPI — what it delivers

The Infineon S25FL512SAGMFIG10 is a 512 Mbit non-volatile NOR Flash memory from the FL-S series, organized as 64M x 8 bits and accessed over an SPI - Quad I/O interface at up to 133 MHz.

133 MHz clock and Quad I/O — throughput for the bus

The 133 MHz SPI clock with Quad I/O support provides a sustained read throughput suitable for execute-in-place operation. The Quad I/O interface reduces command overhead compared to standard SPI.

Where it fits on the board

Surface-mount assembly with no special thermal management required.

Frequently asked questions

Does S25FL512SAGMFIG10 support Quad SPI interface?

Yes, the memory interface is SPI - Quad I/O, which allows four data lines for faster read and program operations compared to standard single-SPI.

What is the clock frequency of S25FL512SAGMFIG10?

The clock frequency is 133 MHz. At this speed with Quad I/O, the part can deliver sustained read throughput suitable for execute-in-place and fast firmware updates.

Is S25FL512SAGMFIG10 compatible with 3.3V?

Yes, the supply voltage range is 2.7V to 3.6V, so a 3.3V rail is within spec with margin on both sides.