Skip to main content
Toshiba Semiconductor TCR2EF33,LM(CT — Power Management (PMIC / Gate Driver)

Toshiba TCR2EF33,LM(CT LDO Regulator, 3.3V Fixed, 200mA, SMV

MPNTCR2EF33,LM(CT
End of Life

Toshiba Semiconductor TCR2EF series LDO regulator, TCR2EF33,LM(CT, fixed 3.3 V output, 200 mA, 73 dB PSRR at 1 kHz, SOT-753 (SMV) package, active.

$0.34Ref. price · indicative, final on quote
PackagingSC-74A, SOT-753
RoHSROHS3 Compliant
SeriesTCR2EF
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

TCR2EF33,LM(CT specifications
ParameterValue
SeriesTCR2EF
Output typeFixed
MountingSurface Mount
Voltage - input5.5V
Voltage dropout0.2V @ 150mA
Voltage - output (Min (Fixed))3.3V
Output current200mA
Current - quiescent60 µA
Operating temperature-40°C ~ 85°C
PSRR73dB (1kHz)
PackageTape & Reel (TR); Cut Tape (CT)
CaseSC-74A, SOT-753
Control featuresEnable
Protection featuresOver Current
Number of regulators1
Output configurationPositive

Product details

3.3 V fixed LDO — 200 mA output, 73 dB PSRR

The Toshiba TCR2EF33,LM(CT is a single-output positive fixed LDO regulator delivering 3.3 V at up to 200 mA from a maximum input of 5.5 V. The 73 dB PSRR at 1 kHz means upstream switching noise at that frequency is attenuated by a factor of ~4500 — relevant when the input rail comes from a buck converter or a noisy digital supply.

Dropout and quiescent draw

Maximum dropout is 0.2 V at 150 mA load — the input rail needs to stay above 3.5 V to maintain regulation at that current. Quiescent current is 60 µA typical, which keeps the self-consumption low in always-on or battery-backed rails.

Package and temperature range

Enable control is provided; the over-current protection limits the output during a fault.

Frequently asked questions

Will TCR2EF33,LM(CT drop into a board designed for TCR2EF29,LM(CT?

The TCR2EF33,LM(CT and TCR2EF29,LM(CT are voltage variants within the same TCR2EF series — same package (SOT-753), same pinout, same 200 mA rating. The only difference is the fixed output voltage: 3.3 V vs 2.9 V. If the downstream load is rated for 3.3 V, the board layout is a direct swap.

What compliance documentation is available for TCR2EF33,LM(CT?

Request the compliance package with your RFQ.