Skip to main content
Log in
Toshiba Semiconductor HN1B04FU-Y,LXHF — Crystals & Oscillators

HN1B04FU-Y,LXHF – Toshiba AEC-Q101 NPN/PNP Dual Transistor

MPNHN1B04FU-Y,LXHF
End of Life

Toshiba Semiconductor HN1B04FU-Y,LXHF, Automotive-grade complementary NPN/PNP transistor pair, 50 V Vce, 150 mA Ic, 150/120 MHz fT, in US6 (SOT-363) surface-mount package, AEC-Q101 qualified.

$0.41Ref. price · indicative, final on quote
Packaging6-TSSOP, SC-88, SOT-363
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

HN1B04FU-Y,LXHF specifications
ParameterValue
MountingSurface Mount
FET typeNPN, PNP
Voltage - collector emitter breakdown50V
Current - collector (Ic)150mA
Current - collector cutoff100nA (ICBO)
DC current gain (hFE) (Min) @ ic, vce120 @ 2mA, 6V
Power - max200mW
Frequency150MHz, 120MHz
GradeAutomotive
PackageTape & Reel (TR); Cut Tape (CT)
QualificationAEC-Q101
Case6-TSSOP, SC-88, SOT-363
Vce saturation (Max) @ ib, ic250mV @ 10mA, 100mA / 300mV @ 10mA, 100mA

Product details

Complementary NPN/PNP pair for automotive signal chains

The HN1B04FU-Y,LXHF packages an NPN and a PNP transistor in a single US6 (SOT-363) package, saving board space in push-pull drivers, H-bridge pre-drivers, and signal conditioning stages where a complementary pair is needed. AEC-Q101 qualification and Automotive grade mean the part is characterised and tested for under-hood and cabin environments, with controlled lot-to-lot consistency for production builds.

Transition frequency and saturation voltage for switching

The NPN side transitions at 150 MHz, the PNP at 120 MHz — fast enough for gate-drive transformers, level shifters, and low-speed switching regulators up to a few MHz. Vce saturation is specified at 250 mV max for the NPN and 300 mV max for the PNP at 10 mA base current and 100 mA collector current — a tight saturation voltage that minimises on-state power loss in the 200 mW total power budget.

Active production with AEC-Q101 traceability

The AEC-Q101 qualification provides traceable test data per the automotive stress qualification standard.

Frequently asked questions

Is HN1B04FU-Y,LXHF AEC-Q101 qualified?

Yes, the HN1B04FU-Y,LXHF is AEC-Q101 qualified and carries an Automotive grade. This means it has been subjected to the automotive stress tests defined by the AEC-Q101 standard, including high-temperature reverse bias, temperature cycling, and moisture resistance.

What package does HN1B04FU-Y,LXHF come in?

The HN1B04FU-Y,LXHF is supplied in a US6 package, which is also described as 6-TSSOP, SC-88, or SOT-363. It is a surface-mount package with 6 leads.

What is the Vce saturation of HN1B04FU-Y,LXHF?

For the NPN transistor, Vce saturation is 250 mV max at Ib=10 mA, Ic=100 mA. For the PNP transistor, it is 300 mV max at Ib=10 mA, Ic=100 mA. These values are at 25 °C unless otherwise noted in the datasheet.