Skip to main content
Log in
Texas Instruments TXB0104ZXUR — Interface & Transceivers

TXB0104ZXUR Voltage-Level Translator, 100 Mbps, 12-UFBGA

MPNTXB0104ZXUR
Obsolete

Texas Instruments TXB0104ZXUR, 4-channel bidirectional voltage-level translator, 100 Mbps data rate, dual supply VCCA 1.2 V–3.6 V / VCCB 1.65 V–5.5 V, tri-state non-inverted outputs, auto-direction sensing, 12-UFBGA package, -40°C to 85°C.

$1.3500Ref. price · indicative, final on quote
Texas Instruments TXB0104ZXUR datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

TXB0104ZXUR specifications
ParameterValue
Output typeTri-State, Non-Inverted
Channel typeBidirectional
MountingSurface Mount
Translator typeVoltage Level
Voltage - VCCA1.2 V ~ 3.6 V
Voltage - VCCB1.65 V ~ 5.5 V
Operating temperature-40°C~85°C(TA)
PackageTape & Reel (TR); Cut Tape (CT)
FeaturesAuto-Direction Sensing
Data rate100Mbps
Case12-UFBGA
Number of circuits1
Channels per circuit4

Product details

What this translator does — and the one spec that decides fit

The Texas Instruments TXB0104ZXUR is a 4-channel, bidirectional voltage-level translator with auto-direction sensing. The outputs are tri-state and non-inverted, so the bus goes high-impedance when the chip is disabled or the supply is off.

Package and layout — the 12-BGA Microstar Junior

This part comes in a 12-UFBGA package, specifically the 12-BGA Microstar Junior with a 2.5 mm × 2 mm body (supplier device package 12-BGA Microstar Junior). It is a surface-mount BGA with a fine ball pitch — expect to use micro-vias or at least a four-layer board to route the signals out from under the package.

The industrial range also covers most factory-automation and instrumentation enclosures.

For new designs, you will need to select a current-production alternative.

Frequently asked questions

What is the replacement for TXB0104ZXUR?

TI has not published a direct pin-compatible replacement for the TXB0104ZXUR in the same 12-BGA Microstar Junior package. For new designs, consider the TXB0104RGYR (14-pin QFN) or the TXB0104PWR (14-pin TSSOP) — both are active, 4-channel bidirectional translators with the same 100 Mbps data rate and auto-direction sensing, but they require a different PCB footprint.