Skip to main content
Texas Instruments TLV1117-18CDCY — Power Management (PMIC / Gate Driver)

Texas Instruments TLV1117-18CDCY LDO Regulator, 1.8V Fixed

MPNTLV1117-18CDCY
End of Life

Texas Instruments TLV1117-18CDCY positive fixed-output LDO regulator, 1.8 V, 800 mA, SOT-223-4 surface-mount package, tube.

$0.89Ref. price · indicative, final on quote
PackagingTO-261-4, TO-261AA
RoHSROHS3 Compliant
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

TLV1117-18CDCY specifications
ParameterValue
Output typeFixed
MountingSurface Mount
Voltage - input15V
Voltage dropout1.3V @ 800mA
Voltage - output (Min (Fixed))1.8V
Output current800mA
Current - quiescent10 mA
Operating temperature0°C ~ 125°C
PSRR75dB (120Hz)
PackageTube
CaseTO-261-4, TO-261AA
Protection featuresOver Current, Over Temperature
Number of regulators1
Output configurationPositive

Product details

Regulator identity and key parametrics

The TLV1117-18CDCY is a single-output positive LDO from Texas Instruments, delivering a fixed 1.8 V at up to 800 mA continuous. Input voltage range extends to 15 V maximum, and the operating temperature span is 0°C to 125°C — this covers commercial and industrial ambient environments, though not the full automotive temperature band.

Package and board-fit for SOT-223-4

Supplied in a SOT-223-4 surface-mount package (also referenced as TO-261-4, TO-261AA). The exposed pad on the bottom side provides the primary thermal path — the PCB copper area under the pad sets the junction-to-ambient resistance, so the layout should dedicate a flooded copper island with vias to an internal plane. The fixed-output configuration means no external resistor divider is needed for the output voltage; the 1.8 V is set internally.

Protection features and compliance status

On-chip protection includes over-current and over-temperature shutdown.

Frequently asked questions

Where can I buy TLV1117-18CDCY and what is the lead time?

The TLV1117-18CDCY is an active Texas Instruments part sourced to order against an RFQ.

What is the PSRR of TLV1117-18CDCY and why does it matter?

The PSRR is 75 dB at 120 Hz. This means the regulator attenuates 120 Hz ripple — the fundamental frequency of full-wave-rectified mains — by a factor of about 5600, so a 100 mVpp input ripple appears as roughly 18 µVpp on the 1.8 V output. For a 16-bit ADC with a 1.8 V supply, that ripple stays well below 1 LSB.