Skip to main content
Log in
Texas Instruments TL082CMX — Analog & Data Acquisition

TL082CMX JFET Op-Amp, 4 MHz GBW, 13 V/µs Slew Rate, 8-SOIC

MPNTL082CMX
Obsolete

Texas Instruments TL082CMX, dual JFET-input operational amplifier, 4 MHz gain-bandwidth, 13 V/µs slew rate, 36 V supply, 8-SOIC surface-mount package, 0°C to 70°C commercial temperature range.

$0.4300Ref. price · indicative, final on quote
Texas Instruments TL082CMX datasheet (PDF)
Packaging8-SOIC (0.154", 3.90mm Width)
RoHSRoHS non-compliant
SeriesAutomotive, AEC-Q100
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

TL082CMX specifications
ParameterValue
MountingSurface Mount
Amplifier typeJ-FET
Voltage - input offset5 mV
Voltage - supply span36 V
Current - supply3.6mA (x2 Channels)
Current - input bias50 pA
Current - output (Channel)17 mA
Operating temperature0°C~70°C
Gain bandwidth product4 MHz
PackageTape & Reel (TR); Cut Tape (CT)
Slew rate13V/µs
Case8-SOIC (0.154\", 3.90mm Width)
Number of circuits2

Product details

TL082CMX — dual JFET op-amp in 8-SOIC

The TL082CMX is a dual JFET-input operational amplifier from Texas Instruments.

Input bias current is 50 pA.

The TL082CMX operates from a single 36 V supply or dual ±18 V rails, giving headroom for ±15 V signal swings in industrial ADC drivers or analog front-ends. Each of the two channels can source or sink 17 mA, sufficient to drive a 2 kΩ load to within a couple of volts of the rails. The quiescent supply current is 3.6 mA per amplifier (7.2 mA total for both channels), which is moderate for a dual op-amp — not optimized for battery operation but acceptable for line-powered equipment.

Mounting and footprint

Frequently asked questions

What is the difference between TL082CMX and TL082CP?

The TL082CMX is the surface-mount 8-SOIC variant, while the TL082CP is the through-hole DIP-8 package. Electrically they share the same core specifications (4 MHz GBW, 13 V/µs slew rate, JFET input), but the package determines the mounting method and board footprint. The CMX suffix indicates Tape & Reel packaging for automated assembly.