Skip to main content
Texas Instruments TL022CP — Memory (DRAM / SRAM / Flash / EEPROM)
Texas Instruments

TL022CP General Purpose Op-Amp, 500 kHz, Dual, 8-DIP

MPNTL022CP
End of Life

Texas Instruments TL022CP, General Purpose Amplifier, 2 Circuit, 500 kHz Gain Bandwidth, 0.5V/µs Slew Rate, 10V to 30V Supply, 8-DIP Through Hole, Tube.

$0.88Ref. price · indicative, final on quote
TL022CP datasheet
Packaging8-DIP (0.300", 7.62mm)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

TL022CP Technical Specifications
ParameterValue
Mounting typeThrough Hole
Amplifier typeGeneral Purpose
Voltage - input offset1 mV
Voltage - supply span30 V
Current - supply130µA (x2 Channels)
Current - input bias100 nA
Current - output (Channel)6 mA
Operating temperature0°C ~ 70°C
Gain bandwidth product500 kHz
PackageTube
Slew rate0.5V/µs
Case8-DIP (0.300\", 7.62mm)
Number of circuits2

Product details

Dual general-purpose op-amp in a through-hole 8-DIP

The Texas Instruments TL022CP is a dual general-purpose operational amplifier in a through-hole 8-DIP package. It delivers a 500 kHz gain-bandwidth product with a 0.5 V/µs slew rate, drawing just 130 µA per channel from a 10 V to 30 V supply. The 8-DIP (0.300", 7.62 mm) footprint and 0°C to 70°C commercial temperature range suit it for benchtop instrumentation, signal conditioning in industrial control panels, and general-purpose analog processing where board space is not the constraint. Input offset voltage is trimmed to 1 mV, input bias current to 100 nA, and each output can source or sink 6 mA — enough to drive a typical ADC input or a logic-level interface.

500 kHz GBW and 0.5 V/µs slew rate — what they mean for the signal path

The 500 kHz gain-bandwidth product sets the usable closed-loop gain bandwidth. The 0.5 V/µs slew rate limits large-signal response.

Frequently asked questions

Is TL022CP obsolete?

No, the TL022CP is Active in production with ROHS3 compliance. There is no last-time-buy or end-of-life notice on this part.

What is the gain bandwidth product of TL022CP?

The gain-bandwidth product is 500 kHz, with a 0.5 V/µs slew rate. This supports closed-loop gains up to about 50 kHz at a gain of 10.

What is the pinout of TL022CP?

The TL022CP uses the standard dual op-amp pinout in an 8-DIP package: pins 1 and 7 are outputs, pins 2 and 6 are inverting inputs, pins 3 and 5 are non-inverting inputs, pin 4 is V-, and pin 8 is V+.