Skip to main content
Texas Instruments SN74ACT08PW — Interface & Transceivers

SN74ACT08PW Texas Instruments AND Gate, 14-TSSOP, Active

MPNSN74ACT08PW
End of Life

Texas Instruments 74ACT series AND Gate, SN74ACT08PW, 4-circuit 2-input, 14-TSSOP package, 4.5V to 5.5V supply, 24mA output, -40°C to 85°C.

$1.15Ref. price · indicative, final on quote
Packaging14-TSSOP (0.173", 4.40mm Width)
RoHSROHS3 Compliant
Series74ACT
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

SN74ACT08PW specifications
ParameterValue
Series74ACT
Logic typeAND Gate
MountingSurface Mount
Supply voltage4.5V ~ 5.5V
Current - quiescent2 µA
Current - output high, low24mA, 24mA
I/O channels2
Operating temperature-40°C ~ 85°C
PackageTube
Case14-TSSOP (0.173\", 4.40mm Width)
Number of circuits4
Input logic level - low0.8V
Input logic level - high2V
Max propagation delay @ v, max CL9ns @ 5V, 50pF

Product details

The SN74ACT08PW: ROHS3 compliant. For a spare-parts storeroom, this is a low-risk SKU — no last-time-buy scramble expected in the near term.

Quad AND gate — 5 V glue logic

Four independent 2-input AND gates in a single 14-TSSOP package. The 2 µA quiescent current means negligible standby draw for always-on gating or enable circuits.

Timing and drive — 9 ns at 50 pF

Max propagation delay is 9 ns at 5 V with a 50 pF load. That gives timing margin for bus gating up to about 50-100 MHz, depending on fan-out. Each output sinks or sources 24 mA — enough to drive standard TTL loads or a small LED directly without a buffer.

Industrial temperature range — -40 to 85°C

This covers factory-floor control cabinets, outdoor telecom enclosures, and most industrial environments.

14-TSSOP with 0.173-inch (4.40 mm) body width. Fine-pitch surface-mount — standard reflow profile for TSSOP applies. Store the reels dry; The supplier device package is 14-TSSOP.

Frequently asked questions

Will SN74ACT08PW drop into a board that was specified around SN74AC32DR?

No — the SN74AC32DR is an OR gate, while the SN74ACT08PW is an AND gate. Both are quad 2-input gates in similar packages, but the logic function is different. A board designed for an OR gate will not function correctly with an AND gate without a schematic change.

What compliance documentation does Texas Instruments provide for SN74ACT08PW?

The SN74ACT08PW is ROHS3 compliant. Standard TI compliance documentation (RoHS declaration, material composition) is available through the datasheet.