Skip to main content
Texas Instruments SM73302MFE/NOPB — Memory (DRAM / SRAM / Flash / EEPROM)

SM73302MFE/NOPB TI SolarMagic Op-Amp, 88 MHz, SOT-23-5

MPNSM73302MFE/NOPB
End of Life

Texas Instruments SolarMagic™ series, general-purpose op-amp, SM73302MFE/NOPB, 88 MHz gain bandwidth, 35 V/µs slew rate, rail-to-rail output, SOT-23-5 package.

$2.87Ref. price · indicative, final on quote
PackagingSC-74A, SOT-753
RoHSROHS3 Compliant
SeriesSolarMagic™
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

SM73302MFE/NOPB specifications
ParameterValue
SeriesSolarMagic™
Output typeRail-to-Rail
MountingSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset10 µV
Voltage - supply span5.5 V
Current - supply1.15mA
Current - input bias0.1 pA
Current - output (Channel)60 mA
Operating temperature-40°C ~ 125°C
Gain bandwidth product88 MHz
PackageTape & Reel (TR); Cut Tape (CT)
Slew rate35V/µs
CaseSC-74A, SOT-753
Number of circuits1

Product details

88 MHz GBW in a SOT-23-5 footprint

The SM73302MFE/NOPB is a single-channel general-purpose op-amp from Texas Instruments' SolarMagic™ series, delivering 88 MHz gain-bandwidth product and 35 V/µs slew rate in a 5-pin SOT-23-5 package. Rail-to-rail output swing and a supply span from 1.8 V to 5.5 V let it interface directly with ADCs or microcontrollers without a secondary level-shift stage. Input bias current is 0.1 pA typical, and input offset voltage is 10 µV typical — both low enough that the error budget in a precision sensor front-end is dominated by the external resistor noise, not the amplifier.

Temperature grade and supply current

Rated for -40°C to 125°C operating temperature, the part suits industrial and automotive-adjacent environments where the ambient inside an enclosure can exceed 85°C. Quiescent supply current is 1.15 mA typical — low enough for battery-powered field transmitters that run on a 3.6 V cell, yet the 60 mA output drive handles a 2 Vrms signal into a 32 Ω headphone load without clipping.

Lifecycle and compliance

Texas Instruments lists the SM73302MFE/NOPB as Active with RoHS3 compliance.

Frequently asked questions

Will SM73302MFE/NOPB drop into a board that was specified around TLV9351IDCKR without rewiring?

Both parts come in the same SOT-23-5 footprint with rail-to-rail output, but the SM73302MFE/NOPB offers 88 MHz GBW and 35 V/µs slew rate versus the TLV9351IDCKR's 3.5 MHz and 20 V/µs. The pinout is identical, so a board designed for the TLV9351IDCKR accepts the SM73302MFE/NOPB without layout changes, but the higher bandwidth may require a different compensation network or PCB parasitics review to avoid oscillation.