Skip to main content
Texas Instruments OPA335AID — Memory (DRAM / SRAM / Flash / EEPROM)
Texas Instruments

OPA335AID Zero-Drift Op-Amp, 2 MHz, 1.6 V/µs, 8-SOIC

MPNOPA335AID
End of Life

Texas Instruments OPA335AID, Zero-Drift Amplifier, 1 Circuit, 8-SOIC, 2 MHz Gain Bandwidth, 1.6 V/µs Slew Rate, Rail-to-Rail Output, 2.7 V to 5.5 V Supply, -40°C to 125°C.

$3.65Ref. price · indicative, final on quote
OPA335AID datasheet
Packaging8-SOIC (0.154", 3.90mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

OPA335AID Technical Specifications
ParameterValue
Output typeRail-to-Rail
Mounting typeSurface Mount
Amplifier typeZero-Drift
Voltage - input offset1 µV
Voltage - supply span5.5 V
Current - supply285µA
Current - input bias70 pA
Current - output (Channel)50 mA
Operating temperature-40°C ~ 125°C
Gain bandwidth product2 MHz
PackageTube
Slew rate1.6V/µs
Case8-SOIC (0.154\", 3.90mm Width)
Number of circuits1

Product details

What this zero-drift op-amp is and where it fits

The Texas Instruments OPA335AID is a single-channel zero-drift operational amplifier in an 8-SOIC surface-mount package. Input offset voltage is 1 µV.

Supply range and single-supply operation

The supply span runs from 2.7 V to 5.5 V. Quiescent current is 285 µA.

Temperature grade and environment

Rated for -40°C to 125°C, the OPA335AID is specified for industrial and automotive environments — engine bay electronics, outdoor telecom cabinets, factory-floor sensor modules. The input bias current of 70 pA stays low enough over temperature that high-impedance sources (pH probes, pyroelectric sensors) do not see significant loading.

Lifecycle and sourcing posture

TI lists the OPA335AID as Active with ROHS3 compliance. The part is sourced through independent distribution and quoted to order against an RFQ.

Frequently asked questions

Is OPA335AID a zero-drift operational amplifier?

Yes, the amplifier type is Zero-Drift, with an input offset voltage of 1 µV and a gain bandwidth product of 2 MHz.

What is the closest functional second-source for OPA335AID?

The TLV9351IDCKR is a pin-compatible general-purpose CMOS op-amp with higher GBW (3.5 MHz) and slew rate (20 V/µs), but it is not a zero-drift type and has a higher typical offset of 350 µV. For precision DC applications requiring the 1 µV offset, the OPA335AID remains the correct choice.