Skip to main content
Log in
Texas Instruments LMV762MA — Analog & Data Acquisition

LMV762MA Dual Comparator, 225ns, Push-Pull, 8-SOIC

MPNLMV762MA
End of Life

Texas Instruments LMV762MA, dual general-purpose comparator, push-pull output, 225ns propagation delay, 2.7V to 5V supply, 8-SOIC package, -40°C to 125°C operating temperature.

$2.05Ref. price · indicative, final on quote
Texas Instruments LMV762MA datasheet (PDF)
Packaging8-SOIC (0.154", 3.90mm Width)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

LMV762MA specifications
ParameterValue
TypeGeneral Purpose
Output typePush-Pull
MountingSurface Mount
Voltage - input offset0.2mV @ 5V
Voltage - supply, single (Dual (±))2.7V ~ 5V
Current - quiescent700µA
Current - input bias50pA @ 5V
Operating temperature-40°C ~ 125°C
PackageBulk
Case8-SOIC (0.154\", 3.90mm Width)
CMRR, PSRR100dB CMRR, 110dB PSRR
Number of elements2
Propagation delay225ns

Product details

What this dual comparator does on your board

The LMV762MA is a dual, general-purpose comparator from Texas Instruments with push-pull outputs. It runs on a single 2.7V to 5V supply — or split rails — and delivers a 225ns propagation delay. That speed is enough for overcurrent detection, zero-crossing, or window comparators on a motor drive or PSU feedback loop, but not for high-frequency switching or fast ADC clocking. The push-pull output eliminates the need for a pull-up resistor, saving a part and a trace on the board.

Rated -40°C to 125°C, so it fits outdoor telecom cabinets, engine-bay electronics, or a factory-floor PLC module without a second look. The 8-SOIC package is a standard footprint — swaps in with basic soldering iron, no hot-air station needed. Bulk packaging means loose tubes; if your pick-and-place line needs tape-and-reel, flag that on the RFQ so we can confirm alternate packaging availability.

Frequently asked questions

What is the output type of LMV762MA?

Push-pull output — no external pull-up resistor needed, which saves a component and a PCB trace.

What is the propagation delay of LMV762MA?

225ns maximum propagation delay. That is moderate — fine for relay drive, overcurrent detection, or zero-crossing circuits, but not for high-speed comparator applications.

Is LMV762MA compatible with 3.3V logic?

Yes, the 2.7V to 5V supply range covers 3.3V logic rails directly. The push-pull output swings rail-to-rail, so it interfaces cleanly with 3.3V CMOS or TTL inputs.

LMV762MA vs LMV761: what are the differences?

The LMV762MA is a dual comparator; the LMV761 is a single comparator. Otherwise they share the same 225ns delay, 2.7-5V supply, push-pull output, and industrial temperature range. Choose the dual for two channels in one package, the single for a smaller footprint.